Axial Fan (15) Centrifugal Fan (61) Inline Fan (0) Roof Ventilator (28) Carpet Dryer (0) Condenser (0) Evaporator (5) Condensing Unit (0) Refrigerant (0) Coil Cleaner (0) Hose Clamp (3)
| Model | BD30 | BD35 | BD43 | BD52 | BD62 | BD72 | |
| Displ M3 | 3 | 3 | 4.3 | 5.2 | 6.2 | 7.2 | |
| Application | LBP/MBP | ||||||
| Refrigerant | R134a | ||||||
| The speed of the moter | 2000/2500/2800/3000/3200/ (3500 ≥24v ) | ||||||
| Regulationg speed resistor | 0KΩ 1KΩ 2KΩ 5KΩ 10KΩ 15KΩ | ||||||
| Amb temp | - 5℃-45℃ | ||||||
| Cooling | ST / FC | ||||||
| Lubricant | 160±5 | 230±5 | |||||
| Weignt (with oil) Kg | 5.5 | 5.5 | 7.5 | 7.5 | 8.6 | 9.1 | |
| Power source V DC | 6.12.24V (36.48.60V Optional) DC | ||||||
| Voltage V DC | 12V ~ 43V DC | ||||||
| Testing conditions: | |||||||
| Evaporating temp: -23.3℃ | |||||||
| Condensing temp: 54.4℃ | |||||||
| Sub-cooling temp: 32.2℃ | |||||||
| Ambient temp: 32.2℃ | |||||||
| Suction temp: 32.2℃ | |||||||
| Automatic controller overheating protection,when inside temperature of the controller is over 85℃,the current will disconnect,automatic resetting when the temperatute lowering down. | |||||||
| If outside extension,we suggest ti use DC blower fan cool the condenser,the compressor and the controller. | |||||||
| Protection signal of controller:flash frequency within 3s. | |||||||
| Error type: Flash1,dull3s fault of hardware; Flash2,dull3s over-current;Flash3,dull3s over-voltage | |||||||
| Flash4,dull3s thermostat cut; Flash5,dull3s temperature too high. | |||||||
| Fault connecting of anode and cathode of voltage, (coonect fuse) compressor not run. | |||||||
 Deutsch |
 Español |
 Français |
 Italiano |
 Português |
 日本の |
 한국어 |
 العربية |
 български |
 hrvatski |
 česky |
 Dansk |
 Nederlands |
 suomi |
 Ελληνικά |
 हिन्दी |
 norsk |
 Polski |
 Română |
 русский |
 Svenska |
Bookmark this page