Pay attention to the timely removal of fallen leaves on the vehicle maintenance vehicle in winter


Like the humans, cars are easy to "sick" in the winter, so it is best to have a thorough inspection of the vehicle in advance. In particular, the amount of antifreeze must be checked. The freezing point and type of antifreeze should be observed in different regions and different models. The antifreeze used for more than two years should be replaced. The mixed antifreeze must be replaced one year.

Timely removal of fallen leaves on the body is a hazard to the car. After the leaves fall to the ground, they will slowly deteriorate and rot. At the same time, they will release some liquids and become nutrients for the trees. However, if you fall in the car, the leaves will be damaged after rot. At the moment of falling leaf time, vehicles should not be parked under the trees for a long time. Remember to clean the leaves in the corner of the car in time.

Correct use of the near and far lights Do drivers use low beams when driving? The low beam light is different from the high beam light and will not affect others. It can also give proper reminding to the surrounding riders to ensure the safety of driving. When entering the tunnel under bright light during the day, driving back and forth in the morning and evening, extreme weather, and reduced visibility in the surrounding area, it is recommended that the owners open the low beam.

Car wires should be wiped off in a rainy day. Vehicles often fail to start the engine, which may be caused by the leakage of the self-ignition system due to moisture. Once this situation is discovered, the owner can temporarily dry the inside and outside of the distribution board and the wires with a dry paper towel or a dry cloth. If the leakage is due to aging, professional replacement is required in time.


Laser Cutting Machine

Tube Laser Cutting Machine,Lower Consumption Laser Cutting Machine,Carbon Laser Cutting Machine

Jinan Jing Xun Cnc Equipment Co., Ltd , https://www.jn-jingxun.com