1. Material: Aluminum Alloy
2. Diameter: 3 "
3. Open method: Mechanical
4. Temperature range: -20 -- +70
1. Bottom Valve
Emergency Shut Valve is installed on the bottom of the tanker, the top parts is tightly sealed inside the tanker. External shear groove design limits product spillage when the tanker is crashed down, it will automatically cut off itself via this groove under the situation there's no affectation on the sealing. This will efficiently protect the over rolled tanker from leakage to ensure the safety when transportation. This product is suitable for water, diesel, gasoline and kerosene and other light fuel, ect.
2. Feature & Benefit
* Special Surface Treatment
The whole valve body is passed a special surface process to improve t anti-corrosion.
* Hydrodynamic Body
Design and high lift popet minimizes pressure drop to give maximum flow rate.
* External Shear Groove
Meets the standard requirements to limit product spillage in the event of an accident.
* Two Ways-Operation
If need, can be installed a outernal cylinder to do the pneumatic control.
 Specifications
1. Material: Aluminum Alloy
2. Diameter: 3 "
3. Open method: Mechanical
4. Temperature range: -20 -- +70
1. Bottom Valve
Emergency Shut Valve is installed on the bottom of the tanker, the top parts is tightly sealed inside the tanker. External shear groove design limits product spillage when the tanker is crashed down, it will automatically cut off itself via this groove under the situation there's no affectation on the sealing. This will efficiently protect the over rolled tanker from leakage to ensure the safety when transportation. This product is suitable for water, diesel, gasoline and kerosene and other light fuel, ect.
2. Feature & Benefit
* Special Surface Treatment
The whole valve body is passed a special surface process to improve t anti-corrosion.
* Hydrodynamic Body
Design and high lift popet minimizes pressure drop to give maximum flow rate.
* External Shear Groove
Meets the standard requirements to limit product spillage in the event of an accident.
* Two Ways-Operation
If need, can be installed a outernal cylinder to do the pneumatic control.
Â
SWACO MD-2 Shaker Screen/MD-3 Shaker Screen
Replacement Screens for M-I SWACO MD-2 & MD-3 Shakers
SJ-Swaco MD-2/3 shaker screen is a kind of composite frame shaker screen specified for both M-I SWACO MD-2 dual flat-deck shaker and MD-3 triple-decker shale shaker. M-I SWACO MD-2 shale shaker is suitable for both onshore and offshore applications and MD-3 triple-decker shale shaker mainly targets primarily high-end offshore operations. Reinforced PT frame reduces the friction between the screen and deck plate. Featured by higher throughput, extended screen life, fewer replacements, our screens aim to lower the cost of mud treatment.
Technical Parameter
- Mesh Material: stainless steel 304/316/316 L.
- Frame Material: PT.
- Screen Type: XR.
- API RP 13C Designation: API 20 – API 325.
- Package: packed in paper carton, shipped by wooden case
Adaptable Shale Shaker Model
SJ-Swaco MD-2/3 shaker screens are used as the substitute screen for
- M-I SWACO MD-2 dual flat-deck shale shaker.
- M-I SWACO MD-3 triple-decker shale shaker.
Competitive Advantage
- Composite screen technology increases effective open area.
- Improves process capacity and maximizes screen life.
- Pre-tensioned screens with light weight for easier handling
- Manufactured according to the API RP 13C (ISO 13501).
- Scientific & reasonable cost control system for competitive price.
- Adequate inventory in the shortest time to meet customers' demand.
Remarks:
M-I SWACO, MD-2, MD-3 are marks of M-I L.L.C.
ShengJia only produces the replacement screens but not original from M-I SWACO
Swaco Md-2 Shaker Screen,Swaco Md-2 Shale Shaker Screen,Shaker Screen,Swaco Shakers
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com