Xb0237 Electronic Digital Display Round Kinfe Leather Skiving Machine; Safety Shoe Machine

• Model NO.: Xb0237
• Power Supply: Electric
• Machine: Pneumatic Sneaker Shoe Sole Pressing Attaching Mac
• Color: as Picture Showed
• Power: 1kw
• Skiving Speed: 0-8 Meters Per Minute
• Trademark: SOGU
• Specification: CE
• HS Code: 33039609

• Condition: New
• Function: Making Vamp
• Brand: Sogu
• Process Width: 0-10mm
• Voltage: 220V 50-60Hz
• Process Thickness: 0-4mm
• Transport Package: Wooden Case
• Origin: Zhejiang, Wenzhou

Name: Xb0237 Digital Display Round Kinfe Leather Skiving Machine 

1. One skiving size can have three different requirement like width, thickness angle.
 
2. The funcion of memory storage, can store 99 requests of skiving. 
 
3. One team can have 1-7 different skiving size.
 
4. Great design of appearance.
 
5. Great dust absorbing system.
 
6. Greater lower the technical dependence of operator at present. 

Matters needing attention 
1) moving workbench or spindle, according to the distance and artifacts, correctly selected movement speed, beware of collision when moving too fast.
2) when programming according to the actual situation to determine the correct processing technology and processing route, prevent due to insufficient processing position or on intensity artifacts caused by insufficient scrap or cut off the drop in advance.
Must be confirmed before 3) wire cutting program and the amount of compensation is correct.
4) check whether the wire electrode tension is enough. When cutting taper tension should be down to the usual half.
5) check the wire electrode of proper feeding speed.
6) according to the actual situation of work piece choose open or close the machining, on the premise of avoiding interference as far as possible to shorten the distance between nozzle and workpiece. The process, the distance between nozzle and workpiece generally take 0.05 ~ 0.1 mm.
7) check the jet choose whether reasonable, with high-pressure jet when rough machining, finish machining with low pressure jet.
8) slice observation should be paid attention to when processing stability, found that bad when adjust.
9) during processing, often should inspect the cutting condition monitoring, found the problem immediately.