2X Rotary Vane Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.
Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.
Specifications
| Model | 2X-4A | 2X-8A | 2X-8 | 2X-15 | 2X-30A | 2X-70A |
| (L/S) Pumping Speed |
4 | 8 | 8 | 15 | 30 | 70 |
| (≤ Pa) Ultimate Pressure |
≤ 6× 10 -2 | |||||
| (kw) Motor Power |
0.55 | 1.1 | 1.1 | 2.2 | 3 | 5.5 |
| (Degrees C) Temperature Rise |
≤ 4 Degrees C | |||||
| dB(A) LW Noise |
≤ 75 | ≤ 78 | ≤ 78 | ≤ 80 | ≤ 82 | ≤ 86 |
| (mm) Inlet Diameter |
Φ 25 | Φ 25 | Φ 40 | Φ 40 | Φ 65 | Φ 80 |
| (rpm) Rotational Speed |
450 | 550 | 320 | 320 | 450 | 420 |
| (L) Injection Amount of Oil |
0.7 | 0.9 | 2 | 2.8 | 2 | 4.2 |
| (cm) Size |
55× 34× 41 | 55× 43× 44 | 79× 43× 54 | 79× 53× 54 | 78× 50× 56 | 91× 65× 70 |
| (Kg) Weight |
54 | 70 | 135 | 196 | 240 | 428 |
2X Rotary Vane Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.
Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.
Specifications
| Model | 2X-4A | 2X-8A | 2X-8 | 2X-15 | 2X-30A | 2X-70A |
| (L/S) Pumping Speed |
4 | 8 | 8 | 15 | 30 | 70 |
| (≤ Pa) Ultimate Pressure |
≤ 6× 10 -2 | |||||
| (kw) Motor Power |
0.55 | 1.1 | 1.1 | 2.2 | 3 | 5.5 |
| (Degrees C) Temperature Rise |
≤ 4 Degrees C | |||||
| dB(A) LW Noise |
≤ 75 | ≤ 78 | ≤ 78 | ≤ 80 | ≤ 82 | ≤ 86 |
| (mm) Inlet Diameter |
Φ 25 | Φ 25 | Φ 40 | Φ 40 | Φ 65 | Φ 80 |
| (rpm) Rotational Speed |
450 | 550 | 320 | 320 | 450 | 420 |
| (L) Injection Amount of Oil |
0.7 | 0.9 | 2 | 2.8 | 2 | 4.2 |
| (cm) Size |
55× 34× 41 | 55× 43× 44 | 79× 43× 54 | 79× 53× 54 | 78× 50× 56 | 91× 65× 70 |
| (Kg) Weight |
54 | 70 | 135 | 196 | 240 | 428 |
Galvanized steel metal box for garden storage bin is made of the galvanization.
Kitchen garden storage Dustbin ,have preferential price and big capacity. Good for kitchen or garden everyday use.
OEM ia available, such as finishing,custom logo and so on.
Trash can with lid and handle, special Locking Lid to stop rodents getting into the bin or strong wind blowing off the lid.
It's great for a range of different uses from household rubbish to storing animal feed.
Type:Kitchenware
Size:75LFishing:OEM
Material:Galvanization Plate
Color: Customized
Logo: Laser logo, Etching logo, Silk printing logo, Embossed logo, Decal logo
MOQ : 2000 PCS/Set
Packaging : White box, Mail box or Customized package
Sample Time : 7~10 days
Lead Time :60 days after have the deposit
Payment: T/T ,L/C or others
Payment term: 30% deposit before production and 70 % balance against the copy B/L
FAQ:
1:How can I get the sample?
We can provide the sample for customers to check the quality.
Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.
You can do the payment of sample via T/T and PayPal.
2:How about the sample time?
Usually the sample time is 7~10 days after have the sample cost.
3:How long will it take for mass production?
Usually 45~60 days after have the deposit.
4:Can we have our logo or company name to be printed on your products or the package?
Welcome OEM.
5:what certificate can you provide?
CE,CB,GS,FDA,LFGB,ROHS are available here.
6:How can we get your monthly new products announcement?
Please join our mailing lists.
Trash Can, Dustbin, Waste Bin
Jiangmen Wellway Houseware Co.,Ltd , https://www.jmwellway.com