With the development of economy, the mold industry is increasingly developed, and the requirements for molds in many industries are beginning to change. The prospects for the mold industry are broad, and the precision mold market is in short supply. However, the proportion of high-tech low-end production in China's mold industry is extremely unbalanced, which is very detrimental to the development of China's mold industry. It is imperative to accelerate the pace of structural adjustment, develop high-end market segments, and synchronize with the international market.
Accelerate structural adjustment
Compared with the past, China's mold technology level has greatly improved, but the domestic mold industry production of high school and low-end ratio is extremely uneven, which is very detrimental to the development of China's mold industry. Despite the past few years, the structure and system of China's mold industry have made great changes, mainly in the middle and high-grade molds, large-scale, sophisticated, complex, long life. However, due to the excessive demand for middle and low-grade molds in China, the self-ration rate for medium and high-grade molds is less than 60%. It is not difficult to see that it is unreasonable.
They mainly in the following aspects: First, the mold steel and other constraints; Second, the level of standardization needs to be improved; Third, high-end mold personnel in urgent need of cultivation; Fourth, accelerate the pace of mold product structure adjustment; Fifth, increase investment to strengthen innovation Capacity; Sixth, promote the joint reorganization between the mold enterprises; VII, overseas market development needs to be deepened.
Improve technological level
As the downstream industries, especially the automotive industry, rely heavily on the key and core molds for import, a series of key and core injection molding products required by related host products are mainly provided by these internationally renowned mold companies.
In recent years, companies in the cabinet have continued to improve mold technology and products. As a result, some plastic molds or injection molded parts began to circulate in the international market. They have successfully entered the supply chain system of some high-end industries and replaced some imported products. Its dependence. However, it is undeniable that only a few are among the high-end international markets.
According to the 12th Five-Year Plan, China's mold industry will focus on breaking through large-scale and sophisticated plastic mold design, such as: automotive plastic molds, marine plastic molds and so on. Only by continuously following up these new advanced technologies and advanced products will we not be eliminated for the times. With the improvement of the technical level of our country's mold industry and the gradual increase of product levels, some international host industry supply chain systems are now further tilted toward domestic enterprises, which will make it an opportunity and a challenge. It is understood that by 2015, the self-supporting rate for molds in the Chinese market will reach over 85%, of which the self-supporting ratio for middle-to-high-end molds will increase significantly.
Some experts pointed out that in addition to continuing to increase production capacity in the future, China's mold industry must focus on internal structural adjustment and technological development. It mainly focuses on the adjustment of the enterprise structure to the specialization, the development of the product structure towards middle and high-end molds, the improvement of the import and export structure, the analysis and structural improvement of the molding of middle-to-high-end automotive panels, multi-functional composite molds and composite machining, and laser technology in the mold design and manufacturing On the application, high-speed cutting, ultra-precision machining and polishing technology, the development of information technology.
In the face of the world's mold market, especially the high-end market, this big cake with broad prospects will appeal to everyone. In response to the current development of the mold industry, related mold machine tool products are developed to capture the market.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
The role of edge banding:
First, the edge banding has the function of blocking harmful gases such as formaldehyde
Good edge banding or multi-sided edge banding can reduce the amount of formaldehyde emission per unit time (ie, slow down the emission rate). It is worth noting that edge banding will not reduce the formaldehyde content of the board, but this has the advantage of edge banding. It can reduce the formaldehyde emission per unit time of unenvironmentally-friendly sheets to a level that is acceptable to humans and does not affect health.
Second, the role of beautifying furniture
Good edge banding has the effect of beautifying office furniture, but if it is to be beautiful, the requirements for edge banding will be higher. Not only must the edge banding and the end surface of the board be firmly and smoothly combined, but also that the edge banding must be combined with other The joints of the surfaces should not have defects such as bottoming, chipping, and large gaps, and the transition should be natural, smooth and smooth.
Third, extend the service life of office furniture
The precise edge sealing design of the board can prevent water or other liquids from entering the board, avoiding the expansion, deformation and breeding of bacteria on the desktop, thereby prolonging the service life of the office furniture, and the office furniture after the edge sealing treatment is also more expensive in terms of cleaning easy.
Fourth, avoid sharp edges and corners from hurting people's bodies
The general edge banding will use the dull edge banding design to smooth the corners of the table, thereby reducing the damage to the body by the sharp corners
PVC Edge Banding For Office,Pvc Edge Banding For Office,Pvc Edge Banding For Office Table,Pvc Edge Banding For Office Furniture
Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com