The rigorous development process guarantees the oil change period of 100,000 kilometers. This product is made of synthetic base oil and imported long-life diesel engine oil additives. It is suitable for liberation of 100,000 kilometers long oil mileage models such as J6P pilot version and Auman GTL super version. Through a large number of driving tests, all test vehicles have accumulated a total mileage of about 1.5 million kilometers. In the high-strength test, more than 40 test vehicles were used to cover all severe conditions such as high temperature, mountainous areas, and multiple ash. In order to ensure the reliability of the 100,000-kilometer oil change period, each test vehicle was subjected to 120,000 km and 2 replacements. The assessment of the oil cycle ensures that the road test is perfectly safe. Through authoritative evaluation by international third-party judges, ensure that the technical solutions are 100% reliable.
In addition, FAW China Resources' new product line has been launched with a high degree of cleanliness and anti-wear performance as its highlights, bringing lubricity and a smooth driving experience for riders.
This product can provide excellent protection for the engine during the start-up phase, reduce engine wear, unique synthesis technology, and increase engine protection at high and low temperatures.
Long life lubricant
A full-effect formula that lubricates the engine parts and quickly forms oil film protection even at low temperatures.
Anti-wear repair, superior protection, significantly reduce cold start wear and low temperature wear, no need for hot cars in winter and summer.
Extend engine life, reduce engine wear by 70%-80%, reduce mechanical failure and extend engine life by more than 3 times.
Reduce engine failure and reduce maintenance costs. Significantly increase power and increase power by 10%-20%.
Reduce engine noise and vibration. Save 5% to 20% of fuel.
Guided by the needs of users and using refined products as services, it has always been the key to the difference between FAW-China Resources' oil products and other brands' markets. Persist in every drop of oil, every product is 100% Is the commitment of FAW China Resources Oil to consumers. The industry believes that the introduction of FAW-China Resources' oil products will effectively make up for the deficiencies in the domestic lubricants market. New products with advanced international standards will also make FAW China Resources Oil a new product and new technology in the lubricant industry. Convergence focus.
Drilling tool assembly (P, H, N and B)
Relevant description of products:
Retrieve the inner tube with an overshot without lifting out the whole rods string to obtain the core, the wireline coring system lifts the underground core sample out of the borehole through the overshot to take back the entire inner tube and conduct sampling analysis. This improves productivity of the work site and guarantees safety of core sample during drilling down.
The system is realized through a fully independent inner tube. During its working, the inner tube does not connect with the overshot but locates at the bottom of the coring Drilling Rod directly (behind the coring drilling bit). An assembly device is installed on top of the inner tube, which includes coring and recycling functions. When the inner tube is full of core sample, the overshot is placed to the bottom from the borehole through a steel wire rope and lifted out by a winch. After the inner tube assembly is lifted to the surface, an empty inner tube is placed to the bottom of the hole to recover the drilling. This improves well drilling efficiency.
Our company provides core barrel assmeblies of different diameters to meet customers' demands. The wireline coring system is applicable for most drilling conditions and standard DCDMA hole sizes (B, N, H and P).
Currently, the company provides two models of wireline coring systems: double-tube and triple-tube
Core barrel assembly: It consists of inner tube and outer tube groups.
The inner part consists of the following parts: spearhead assemly, retrival components, core sample collection component, landing shoulder, stop ring and other parts.inner tube group, independent from outer tube group, collects core sample sample during well drilling.
The outer tube part consists of parts , which includes locking coupling, adapter coupling, outer tube, etc. The outer tube group that is kept at the bottom of the hole all the time holds the inner tube assembly during drilling.
The triple tube coring system AU3 has the same components as the dual-tube. And its interior has a third tube that is known as liner tube of the inner tube.
Liner tube of the inner tube is placed in the inner tube. The triple tube system can realize overall recovery ratio of core sample when drilling stratum with coal, clay or bigger crack. The liner tube or split tube keeps the core sample at its receiving status to collect or load and store easily.
Only N, H and P sizes are available for the triple tube coring system.
Core Barrel&Overshot,Core Barrel Overshot,Core Barrel For Geological,Core Barrel Of Diamond Core Driller
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com