1), pre-installed cleaning pipeline equipment, remove impurities, so as to avoid clogging.
2) The steam traps must be installed under the lowest point of the steam-consuming equipment and easy to drain and be easily overhauled. The steam traps should be arranged in a centralized manner as far as possible for ease of management and the connections should be firm and tight.
3), installation, pay attention to the direction of the arrow on the valve body and pipeline medium flow direction should be the same.
4) For steam traps without filter, the filter should be installed in front of the valve. The overcurrent area should not be less than 1.5 times of the passage area. The filter should be installed in an easy-to-disassemble position.
5) Where freezing may occur, anti-freezing measures should be taken.
6) After the steam traps are installed, the hydrostatic test is required. The test pressure is the same as the test pressure of the plumbing system in which it is installed.
7). For installation requirements, please refer to National Architectural Design Standard Atlas 05R407 "Selection and Installation of Steam Condensate Recovery and Hydrophobic Device" and manufacturer's samples.
HART Plate is manufactured by depositing chromium-rich, abrasion-resistant materials on mild steel base plate using a traditional arc welding process. This product is usually referred to as chromium carbide overlay (CCO) plate on the market. The hardfacing overlay is suitable for severe abrasive wear and impact applications. Qingdao HART Industrial Technology Co., Ltd was established in 2003, it had a long history of providing innovative wear solution and world class wear products.
The ultimate hardfaced product for your application depends on the material--whether rock, sand, gravel or other substance--striking or sliding along the surface of your wear part. It also depends on the angle and speed of impact as well as the operating temperature.
Feeder Cone,Wear Plate Feeder Cone,Chromium Carbide Feeder Cone,Feeder Cone Plate
SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com