Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator

Posted on

Model NO.: DTI 1500-500
Trademark: X-ing
Transport Package: Wooden Case
Specification: 200*96*105 (cm)
Origin: China
HS Code: 841280009
model  thrust speed push distance motor model
DTI 1500-500 1500 80 500 JW5024
Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator


The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal, chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on, with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
DT type electric linear actuator 
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from 0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire, explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing and other departments. 
NO. Type Trust
(kg) 		Route
(mm) 		Speed
(mm/s) 		Motor 380(V) Le(mm) contour dimension
(L*W*H)mm  		 
(weight)
(kg) 
          Type Power(w) Revolution
(T/Min) 		Electricity(A) LeMin LeMax    
1 25-20-I 25 200 48 AO25024 40 1400 0.23 369 569 580*125*118 7.5
2 25-20-II 25 200 96 AO25022 60 2800 0.23 369 569 580*125*118 7.5
3 100-40-I 100 400 42 AO5624 120 1400 0.47 640 1040 858*152*206 23
4 100-40-II 100 400 84 AO5622 180 2800 0.52 640 1040 858*152*206 23
5 300-50-I 300 500 42 AO6334 370 1400 1.12 745 1245 998*170*226 35
6 300-50-II 300 500 84 AO6332 550 2800 1.38 745 1245 998*170*226 35
7 500-50-I 500 500 50 AO7134 750 1400 2.02 778 1278 1098*190*226.5 52
8 500-50-II 500 500 100 AO7132 1100 2800 2.6 778 1278 1098*190*226.5 52
9 700-60-I 700 600 50 AO7134 750 1400 2.02 803 1343 1193*200*279 63
10 700-60-II 700 600 100 AO7132 1100 2800 2.6 803 1343 1193*200*279 63
11 1000-60-I 1000 600 50 JO2-21-4 1100 1400 2.68 883 1483 1260*204*271 75
12 1000-60-II 1000 600 100 JO2-21-2 1500 2860 3.24 883 1483 1260*204*271 75
13 1600-80-I 1600 800 50 JO2-31-4 2200 1400 4.9 1063 1863 1535*302*330  
14 1600-80-II 1600 800 100 JO2-31-2 3000 2860 8.06 1063 1863 1535*302*330  
 

1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9, Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork


Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator

Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator


OUR WORKSHOP
Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator
Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator



Packing:
Industrial Electric Linear Actuator Hydraulic Cylinder Motor Drive Linear Actuator Electric Actuator


FAQ:
Q:Are you trading company or manufacture ?
A:We are real manufacture
Q:How long is your delivery time?
A:Generally it is 20-30days if the goods are in stock. or it is 30-40days if the goods are not in stock,it is according to order quantity.
Q:What is your payment term?
A:Payment <=2000USD,100% in advance. Payment >=2000USD,30%T/T in advance,balance before shippment. or By Irrevocable L/C at sight.
Q:Do you provide samples? is it free or extra?
A:Yes,we could offer the sample with cost price or free charge, but do not pay the cost of freight.
If you have another question,pls feel free to contact us as below:



Due to the special nature of the product, the online price is a regular offer, pls send your detail technical request, we will offer you according to your actual needs .

 

Aluminized Steel Exhaust Pipe

Our CNC mandrel bending machine can bend 1.5" to 4" aluminized tube, we can bend from 0 degree to 180 degree. The aluminized pipe is used for most Australia market, it is most popular item, you are welcome to order.

High flow Exhaust Pipe can be made as customer required

Bolt-on exhaust pipe can use more conveniently

Aluminized Steel Exhaust Pipe

Aluminized Steel Exhaust Pipe,Car Exhaust Pipe,Exhaust Straight Pipe,Galvanized Aluminized Steel Exhaust Pipe

JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD , https://www.golbaltour.com