- Model NO.: JG1000
- Safety Factor: 3 Times
- Nw: 36kg
- Self Size mm: 298*153*135
- Max Capacity: 3000kg
- Brand: Toyalift
- Transport Package: Wooden Case
- Origin: China
- Capacity: 1000kg
- Magnet Activation: Locking on/off Handle
- Gw: 39kg
- Package Size mm: 430*280*240
- Certificate: Ce
- Trademark: ARK
- Specification: JG-1000
- HS Code: 8505901000
Permanent magnetic lifter, Lifting magent, is a manual tool, which is used for lifting the sqaure, flat or round surfaces steels or iron parts. Because inside of the lifter, there is an release device that will not contact or damage the surface of the part being lifted. Normally it used with crane, which save human labor.Â
The lifting magent includes diffrent capacity, basiclly it has 100kg 300kg 400kg 1t 2t 3t and 5t.Â It is very easy to use the lifting magent, only need the operator manually switch the lock-on and block-off states.Â
|Lifting Magnet/Magnetic Lifter Specification Chart|
Never stand under loading being lifted. Always use extra caution. Only use the lifting magents on material that doesn't on flex or bend.
The surface of the lift, and the parts being loaded, should keep clean and free of chips, oil,slag,dirt,etc. Lifting magnets must be centered on load parts. Do not recommended for painted or finish coated surfaces.
CNC Hydraulic Flat Bar Punching, Marking & Shearing Machine
CNC Hydraulic Punching Machine for Plates
POWER: Three phase four wire systems
AC Voltage: 380 V /415 V
Fluctuation of voltage: Â±5%
Local working temperature: 0-40â„ƒ
Used for punch and mark of joint plate in the field of iron tower. It is also used to punch and mark metal plate of other trade.
The Feeding Conveyors (Double linear guide with rack gear in middle, high precision)
Y Axis Main Machine Wove Back And Forth By Double Linear Guides
Double leaner guides feeding and NC feeding carriage
Automatic Feeding Carriage
1. The machine-frame is made by C-type plate
welding, with good rigidity and big handling space. The machine sets three
die-stations (among them, one is the marking die-station), automatic switching
die-stations. Clamping system can adapt to different work piece, with zero
baffles as datum mark, and work piece supported by rolling-ball working table.
Axis X & Y action should be controlled by servo motor and ball-screw
driving, and double-axis CNC system controls the position of punching, so as to
make the whole machining process automatically; operator may input the sizes of
work piece to computer for repeated calling program in the future.
2. Adopt CNC technology, servo motor in feeding, with high efficiency, stable work piece precision.
3. Important functional components adopt modular assembly, easy to repair it.
4. Carry out punching, marking and drilling on the one plate.
5. Drilling unit has the functions including rapid falling, slow work-feeding and quick feeding back to improve working efficiency.
6. Easy programming, may input the diameter of holes, position and the quantity of work piece to computer, and also may use the program generated by lofting software, or adopt direct conversion CAD/CAM.
7. With function of self-diagnosis for failures.
8. Lighten the working strength of workers.
Installation:The seller shall send one engineer to the buyer's country for installation, commissioning and training. The buyer is responsible to provide all necessary equipments for handling and lifting the machine parts before seller's engineers go to the buyer's plant. In addition, the buyer should provide workers to support in installation activities, under supervision from the seller's engineers.
Commission:The Supplier should give drawings and other details of material/preparation required for installation of machinery which the buyer has to prepare and keep ready before the machine arrives at the buyer's factory. Installation and commissioning can be finished within 5-10 days for above machine generally.
Training:Training will include training on computer programming, machine operation and troubleshooting. The training time is at most 5 days for this machine.
The buyer should arrange no less than two people for accepting training. After training, the buyer should sign the "Receiving & Inspection Report" supplied by the seller to demonstrate the successful finish of commissioning and acceptance of the buyer.
Factory:With the development of SUNRISE, now our company has occupied important position in this industry. Due to the orders and sales performance is continuously improving, in order to better development, to meet customer's demand, and to provide customers high-quality equipment with the shortest time, our company have bought the new site, the area about 50,000 square meters, this will make sufficient preparation for development of our company and every customer.
Workshop:Quality make brand, honesty win market, harmony converge talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advanced and productive solutions in the CNC machine industry.
Warehouse:Manufacturing customer oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever. Therefore, we never compromised with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc., which help control quality, increase work efficiency and guarantee products' stability, reliability and precision. Therefore, the enterprise can achieve rapid and sustainable development.
Team:We are a team of experienced and dynamic professionals who are experts in handling precision work through scientific processes. The professional excellent talents unite a powerful and creative team of design, research and development, which build our solid technical strength and competitiveness. And our company is developing fast and supply specialized service to all customers.
SUNRISE is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.
Flat Bar Punching Machine,Flat Plate Punching Machine,Flat Bar Shearing Machine, Flat Bar Hydraulic Press Machine
Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com