Q1332 330mm Large Spindle Hole Horizontal Pipe Threading Lathe Machine
Product Picture:
Main Performance Characteristics:
The large spindle bore and dual chuck allow for clamping and processing of large diameter pipes;
Integral machine bed made from high-strength iron ensures high rigidity and precision;
Ultrasonic frequency quenched guide ways are hard enough for good wear resistance;
Equipped with a taper guide bar device to enable the machine to process tapered threads.
Application:
Q13 series pipe threading lathe machinesare mainly used for turning internal and external threads, including metric and inch thread. They also offer all the common functions of a standard engine lathe, such as processing the inner bore and end face of shafts and disks. This series is equipped with a taper guide bar device, enabling it to process tapered threads.
This series of lathes is widely used in industries such as oil drilling, coal and mineral mining, chemical piping, and geological prospecting. It is an efficient equipment for processing and repairing drilling pipes, drilling rods, and thread couplings.
Standard Accessories:
Tool post, tailstock, chuck, taper guide bar, lighting lamp, coolant pump, rear support bracket, pad iron, etc.
Optional Accessories:
Digital readout, chuck, faceplate, chasing dial, center rest, signal light, protective cover (lead screw, chuck, tool post), and grinding attachment, etc.
Main Technical Parameters:
| Specifications | UNIT | Q1332 | |
| Capacity | Swing over bed | mm | 1000 |
| Swing over cross slide | mm | 610 | |
| Distance between centers | mm | 1500/3000 | |
| Pipe threading range | mm | Ø190-320 | |
| Width of bed way | mm | 755 | |
| Max load capacity | T | 5 | |
| Spindle | Spindle bore | mm | 330 |
| Spindle speed steps | - | 9 steps | |
| Spindle speed range | rpm | 7.5-280 | |
| Chuck size | mm | Ø780 | |
| Chuck type | - | 4-jaw manual | |
| Turret | Turret type | - | Manual 4 position |
| Tool shank size | mm | 40x40 | |
| Turret travel | mm | 300 | |
| Carriage | X axis feed grade/range | mm/r | 22/0.02-0.45 |
| Z axis feed grade/range | mm/r | 26/0.07-1.33 | |
| X axis rapid traverse speed | mm/min | 1870 | |
| Z axis rapid traverse speed | mm/min | 3740 | |
| X axis travel | mm | 520 | |
| Z axis travel | mm | 1300/2800 | |
| Tailstock | Tailstock quill diameter | mm | 140 |
| Tailstock quill taper | - | MT#6 | |
| Tailstock quill travel | mm | 300 | |
| Motors | Main spindle motor | kW | 22 |
| Rapid traverse motor | kW | 1.5 | |
| Coolant pump motor | kW | 0.125 | |
| Thread | Metric thread grade/range | mm | 23/1-15 |
| Inch thread grade/range | T.P.I. | 22/2-28 | |
| Module thread grade/range | mm | - | |
| DP thread grade/range | D.P.I | - | |
| Size | Width x Height | mm | 2100X1630 |
| Length | mm | 4190/5690 | |
| Weight | Net weight | T | Motorcycle Light Motorcycle Light,Motorcycle Tail Light,Motorcycle Rear Brake Lamp,Motorcycle Led Turn Signals Light NINGBO KLEANSOURCE ELECTRONIC TECHNOLOGY CO., LTD , https://www.vehiclelightings.com |