Road Vibration of Road Beam, Hot Selling Aluminum Concrete Floor Vibrator Truss Screed with High-Quality

Specification
 
Material: Steel, aluminum
1-2m single link
Operating frame
Famous bearing
Gasoline engine or electric motor
Length: free combination 4-18 m
 
 concrete vibrator beam
Choose us for the professional concrete road building projects
 
Description
 
 
Using for provide the ground for concrete slurry Compaction
 
Leveling is the construction of roads workshop, place the new equipment.
 
Job requirements:
 
1. The use of the strength of C25# concrete.
 
2. Concrete should be a one-time pouring to the design level (preferably structural concrete
 
direct casting).
 
3. The design of the pan slope 1.5%-2% must ensure that the minimum value of concrete thickness is not less than 10cm.
 
4. According to the location of the workshop structure pile, reasonable design of the location of
 
the ground expansion joints, the vibration beam can be adjusted to 3-18 meters can be, the
 
general optimal width of 4.5-15 meters.
 
5. Back filling requirements of full compaction, and according to the pan slope backfill height.
 
6. The slump value satisfied with 120mm + 20mm.
 
7. Concrete water cement ratio is not higher than 0.5
 
8. The maximum diameter of 30 mm, 8 concrete aggregate
 
9. The concrete smoothness should meet + + 5mm/2m (GB)
 
Feature
 
1. Equipped with the international famous brand HONDA gasoline engine, famous brand quality
 
assurance, superior performance, easy to start.
 
2. The main shaft bearing selection of the international well-known NSK strong earthquake
 
resistant exterior ball for the heart bearing, to ensure the machine performance.
 
The spindle is not less than 0.05mm, to ensure that the machine can rotate at a high speed
 
for a long time.
 
3. The single section is connected with the super universal joint, which can adjust the 10-30
 
degree arch.
 
4. The overall framework of the whole steel structure, strong earthquake.
 
5. Leveling floor can freedom of assembly, disassembly, greatly reduces the maintenance cost.
 
6. Surface spray, beautiful appearance, anti rust and corrosion resistance.
 
Parameter
 
 


 
Specification
 
Material: Steel, aluminum
1-2m single link
Operating frame
Famous bearing
Gasoline engine or electric motor
Length: free combination 4-18 m
 
 concrete vibrator beam
Choose us for the professional concrete road building projects
 
Description
 
 
Using for provide the ground for concrete slurry Compaction
 
Leveling is the construction of roads workshop, place the new equipment.
 
Job requirements:
 
1. The use of the strength of C25# concrete.
 
2. Concrete should be a one-time pouring to the design level (preferably structural concrete
 
direct casting).
 
3. The design of the pan slope 1.5%-2% must ensure that the minimum value of concrete thickness is not less than 10cm.
 
4. According to the location of the workshop structure pile, reasonable design of the location of
 
the ground expansion joints, the vibration beam can be adjusted to 3-18 meters can be, the
 
general optimal width of 4.5-15 meters.
 
5. Back filling requirements of full compaction, and according to the pan slope backfill height.
 
6. The slump value satisfied with 120mm + 20mm.
 
7. Concrete water cement ratio is not higher than 0.5
 
8. The maximum diameter of 30 mm, 8 concrete aggregate
 
9. The concrete smoothness should meet + + 5mm/2m (GB)
 
Feature
 
1. Equipped with the international famous brand HONDA gasoline engine, famous brand quality
 
assurance, superior performance, easy to start.
 
2. The main shaft bearing selection of the international well-known NSK strong earthquake
 
resistant exterior ball for the heart bearing, to ensure the machine performance.
 
The spindle is not less than 0.05mm, to ensure that the machine can rotate at a high speed
 
for a long time.
 
3. The single section is connected with the super universal joint, which can adjust the 10-30
 
degree arch.
 
4. The overall framework of the whole steel structure, strong earthquake.
 
5. Leveling floor can freedom of assembly, disassembly, greatly reduces the maintenance cost.
 
6. Surface spray, beautiful appearance, anti rust and corrosion resistance.
 
Parameter
 
 


 

6kg Gas Cylinder

6Kg Small Lpg Steel Bottle,Used Refilled Gas Tank,6Kg Lpg Gas Cylinder,6Kg Propane Tank

Low Pressure Gas Cylinder,High Pressure Gas Cylinder,Co., Ltd. , http://www.china-speycylinder.com