Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton

Model NO.: Yz33
After-Sales Service Provided: Engineers Available to Service Overseas
Advantage: High Cost Performance and High Production
Power Source: Hydraulic
Controller: PLC
Worktable Size: up to Clients′ Requirement
Color: Optional
Trademark: ZHENGXI
Transport Package: Standard International Wooden Case or Iron Pallet
Specification: set
Origin: China
HS Code: 8462919000

Vulcanization & Rubber molding

Forming the future with ZHENGXI

System solutions for Rubber

Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton

Rubber Industries

Production of raw NR might be classified as an agricultural industry because latex, the starting ingredient, is grown on plantations in tropical climates. By contrast, synthetic rubbers are produced by the petrochemical industry .Finally, processing into tires and other products occurs at processor (fabricator) plants, commonly known as the rubber industry .The company names include Goodyear, B. F. Goodrich, and Michelin, all reflecting the importance of the tire.

Rubber Processing and Shaping

Production of rubber goods consists of two basic steps:

  • 1.Production of the rubber itself
  • 2.Natural rubber is an agricultural crop
  • 3.Synthetic rubbers are made from petroleum
  • 4.Processing into finished goods, consisting of:
  •  5.Compounding
  • 6. Mixing
  • 7. Shaping
  • 8. Vulcanizing
Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton

When it comes to producing rubber products, multiple manufacturing processes exist. Each manufacturing process has particular benefits that make it the ideal choice for manufacturing certain types of products. Knowing the manufacturing processes can help you understand cost implications and tradeoffs. Some of the most common rubber manufacturing processes are extrusion, latex dipping, molding, and calendering.

The additives must be thoroughly mixed with the base rubber to achieve uniform dispersion of ingredients

1.Uncured rubbers have high viscosity so mechanical working of the rubber can increase its temperature up to 150°C (300°F)

2.If vulcanizing agents were present from the start of mixing, premature vulcanization would result - the "rubber processor's nightmare"

The most common manufacturing process is called calendaring, which works by forcing softened material into the center of counter-rotating rollers. Rollers compact the material and the overall thickness of the product is determined by the gap distance between cylinders, which can be adjusted for varying product thicknesses. Once the material passes through cooling rollers, it must be vulcanized. This process works best to produce sheets or films of rubber. Some benefits of calendering include control over product thickness and the ability to produce parts thinner and wider than with the extrusion. However, calendering has high operating costs compared to other processes.

Vulcanization &  molding

Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton

Vulcanization or vulcanisation is a chemical process for converting natural rubber or related polymers into more durable materials by heating them with sulfur or other equivalent curatives or accelerators. These additives modify the polymer by forming cross-links (bridges) between individual polymer chains.Vulcanized materials are less sticky and have superior mechanical properties. The term vulcanized fiber refers to cellulose that has been treated in a zinc chloride solution to cross-link the cellulose fibers.

Although curing of rubber has been carried out since prehistoric times, the modern process of vulcanization was not developed until the 19th century, mainly by Charles Goodyear. Today, a vast array of products are made with vulcanized rubber, including tires, shoe soles, hoses, and conveyor belts.

 

The term "vulcanization" is named after Vulcan, the Roman god of fire. Hard vulcanized rubber is sometimes sold under the brand name Ebonite or the genericized former brand term "vulcanite", and is used in making articles such as clarinet and saxophone mouth pieces, bowling balls, and ice hockey pucks.

Each manufacturing process is ideal for producing certain types of rubber products. Understanding the processes available can make planning for manufacturing a lot easier because each process has its own cost and time limitations.

 

ZHENGXI has developed and implemented hundreds of hydraulic presses for rubber, plastics & composites applications all over the world. Apart from multi-platen press solutions, we serve the rubber industry with compression molding press dedicated to tire production.

Application

1. Aerospace

Re-useable silicone vacuum bags, pressure bladders, caul sheets, extrusions, compaction bags, molded parts, silicone sheet fluoroelastomer, tool sealant, infusion products.

2.Gasket Supplies

Silicone sheet, fluoroelastomer sheet, molded pads, sponge sheet, fabric reinforced sheet.

3. Automotive

Gasket material, extrusions, fluoroelastomer sponge sheet.

4. Composite Manufacturing

Re-useable vacuum bagging material, seals, caul sheets, tool sealant, vacuum infusion products.

5. Cabinet Manufacturing

Parameter
 
Model   unit Yz33-200T Yz33-315T Yz33-500T Yz33-650T Yz33-800T Yz33-1000T Yz33-1250T
Nominal Force KN 2000 3150 5000 6500 8000 10000 12500
Max working pressure of liquid MPA 25 25 25 25 25 25 25
Plate press KN 630 1000 2000 2500 3150 4000 5000
Max. open height mm 1200 1500 1600 1700 2000 2300 2500
Stroke  mm 700 800 900 1000 1100 1200 1500
Plate stroke mm 250 300 350 350 400 400 500
Slide speed Down mm/s 80 120 120 200 300 270 300
Pressing mm/s 10~20 10~25 14~35 10~35 10~35 10~35 15-30
Return mm/s 80 130 115 150 150 270 200
Table size Left-right mm 800 1600 1800 2400 3000 3600 4600
Front-back mm 800 1200 1600 1800 2000 2400 2400
Plate size Left-right mm 600 1200 1400 1800 2200 2600 3600
Front-back mm 550 800 1100 1200 1300 1500 1500
Motor power KW 22 44 60 74 90 110 190
Type   Four-column Four-column Four-column Four-column Frame Frame Frame


Factory details


Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton

Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton


Certificate

Vulcanizing Press for Rubber Synthetic Rubber Production Line 200 Ton

After-sale service

1.Personnel training
Free training for about one week.

2. After-sale service
One year warranty.During warranty period,free maintenance service can be provided.(except man-made faults or damages arising from irresistible natural factors)

3.Installation
Customers need to pay the commission to our proffessional engineer, and travel expense is on foreign customer.(Including round ticket and accommodation cost)

Elbows 90º long radius, butt weld fittings



ASTM A815 WPS32760 Long Radius Elbow

astm A815 / A815M Elbow,reducer, 180deg return, pipe fittings,cap, lap-joint stud end,straight tee, cross, end cap, bend pipe, return bend.

ELBOWS- 90 DEGREES LR ,45 DEGREES LR, 90 DEGREES SR, 45 DEGREES SR, 90 DEGREES LR RED ELBOW,

180 LR RET. BEND, 180 SR RET BEND,

TEES, RED TEES,

CONCENTRIC REDUCER, ECCENTRIC REDUCER,

CAP, ASME LAP JOINT STUB END LONG PATTERN, ASME LAP JOINT STUB END SHORT PATTERN,

MSS LAP JOINT STUB END TYPE A OR TYPE B OR TYPE C,

45 DEGREE LATERAL, CROSS, 45 DEGREES 3 D ELBOW, 90 DEGREES 3 D ELBOW, 45 DEGREES 6D ELBOW


2. Em ail------lily(at)tobo-group.com

3. thickness SCH 5S~XXS


Super Duplex stainless


ASTMA815 UNS S31803 S32750 S32760 S31254 S32205

Duplex stainless 2205 2507 254SMO

EN DIN 1.4462 1.4410 1.4501 1.4547

ASTM A 815 & ASME SA815, WP UNS S32550 (ALLOY 255 DUPLEX) FERRALIUM,

WP UNS S31803 (ALLOY 2205 DUPLEX) W OR S, UNS S32205 (ALLOY 2205+2 DUPLEX) W OR S

ASTM A 815 & ASME SA815, WP UNS S32750 (ALLOY 2507 SUPER DUPLEX),

WP UNS S32760 (ZERON 100 SUPER DUPLEX) W OR S

4. Standard ASME B16.9 MSS SP-43

5. Packing: case or tray

6. Delivery according to qty

7. Usage Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc

8. Accept the 3rd party to test (SGS BV TUV, etc)



Long Radius Elbow

Degree Long Radius Elbow, Long Radius 90 Degree Bend, 90 Degree Steel Pipe Elbow

Hebei Jimeng Highstrength Flange-tubes Group Co.,Ltd. , https://www.jimengflange.com