72cav. Pet Preform Mould with Shut off Nozzle

Model NO.: 110
Certification: CE
Customized: Customized
Cavity: 1-96
Trademark: Hengxin
Specification: 72Cav. PET preform mould
Origin: Huangyan, China
---Usually, Multi-cavity pet preform mould does use the hot runner system rather than cold runner system, so the design of hot runner system plays an important role in mould quality guarantee. Based on foreign advanced techniques and combined with domestic clients demand, we adopt the valve gated design, in which each cavity has its own heating zone and temperature is measured by independent thermocouple. (advantages: Easily avoid some problems such as white or draw bench on bottom). Here, Mould is produced automatically to reduce labor force.
Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45). In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max. Part and min. Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)

---Our mould, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.10mm; Weight difference is less than 0.3G; 2-5 moulds per minute; Utmost 144 cavities in one mould.
Main feature:
Cavity from 1 up to 144.
Control system with simulating stretch testing improve rate of production.

--- Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentrically.
---Material of mould die core and die cavity are made of Sweden special mould steel.
---Standard screw neck, imported nitride steel with high hardness is of long usage.

---Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
---Valve gated type without tail reduces labor force.
---At least 2 million shots guarantee.

72cav. Pet Preform Mould with Shut off Nozzle

SZL series biomass-fired steam boiler is package or shop-assembled water tube boiler with double steam drum and chain grate stoker structure. 4-6 tph boiler is package boiler and 6-35 tph is shop-assembled structure, which is composed of 2 parts, upper part is heat absorbing surface and lower part is combustion equipment. The former part of boiler body is surrounded by membrane wall, its upper part connects with boiler drum and lower part connects with header, which forms a combustion chamber to absorb the radiated heat from furnace; there are dense convection tube bundle between the back side of upper and lower drum, the high temperature smoke enters a separate economizer after flushing heat absorbing surface then discharge from chimney.

SZL Steam Boiler

WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com