2. The network shielded wire must be connected to the weak grounding point in the general control room.
3, before the call for each door host code, can not be repeated.
4. When the residential building intercom system cannot work, you should check whether the D1 and D2 data lines are wrong.
5, under normal circumstances, the network data line D1 has a voltage of about 2.3V, D2 has a voltage of about 2.7V, D1, D2 voltage is usually changed between 2-3V. If the voltages of D1 and D2 are the same, the joint building network intercom system cannot operate. When calling and talking, audio A1 and ground have 5.6-6V voltage. If the above parameters are not normal, it is necessary to check the relevant lines.
6, on the cell door less host cell, if the device and the line is correct, but after power on the transaction machine can not work, you can leave the nearest airport host computer, relay isolator, connect their lines, its Above removed, unit test.
7. Regarding the larger cells that surpass the host of 24 cell gates, disconnect the network bus on the cell center trunk isolator first, and access the transponder on the central relay isolator to recognize that the fault is not in the central relay isolator. Before and after, find the test sequentially.
After completing the installation and commissioning of the above residential community building intercom network system , if there are doubts, it is recommended that you contact the manufacturer.
Keywords: community building intercom community building intercom network system
Stanley Breaker Chisels
Professional Stanley Hydraulic Breaker Chisel manufacturer is located in China, including Stanley Breaker,Stanley Breaker Chisel,Stanley Brand Hydraulic Breakers, etc.
Hydraulic breaker hammer chisel tool wearing resistance with longer working life
While we asked our loyal user why you always choose our hydraulic breaker hammer chisel tool. The user told they also bought from Korean years ago. hydraulic breaker hammer chisel tool quality is very good quality. And hydraulic breaker hammer chisel tool is three times longer working life than normal brand. The most important the chisels have nothing failure at all in these years.
Hydraulic breaker hammer chisel tool features:
1.Good quality material
Many kinds of steel can be made to hydraulic breaker hammer chisel tool. But different material means different quality. We choose the most competitive but very good material HB as the standard material. This materail is higher strength, good toughness,and it can stand continue impacting.
Different heattreatment
Except the raw material, heattratment is another fatal point to a good quality hydraulic breaker hammer chisel tool. We use salt-bath furnace in house with longer time to make use the material is penetration for longer working life.
Stanley Hydraulic Breaker Chisel,Stanley Breaker,Stanley Breaker Chisel,Stanley Brand Hydraulic Breakers
Handan Hanbing Machinery Manufacturing Co.,Ltd , https://www.handanhanbing.com