The paint on the new car looks particularly bright, but after a while, the paint will gradually lose its original bright luster, which is called paint loss. In addition to affecting beauty, there may be other aspects of damage, what should I do?
First of all, to determine the cause of paint loss of light, natural oxidation caused by loss of light: car paint no obvious scratches, with a magnifying glass to observe the paint spot is small, this type of cause is mostly caused by redox reactions.
2. Light loss caused by shallow scratches: More scratches are placed on the car's paint surface, especially in a well-lighted environment, such as under sunlight, which will affect the glossy finish.
3. Loss of light caused by the lens effect: Observe the paint surface carefully with a magnifying glass. If there are more spots on the paint surface, it indicates that the car paint surface is seriously eroded by the lens effect, and the gloss is affected by different degrees.
4. Reasons for car painting (1) The paint used has poor weather resistance, and it is prone to discoloration and loss of light under very bad climatic conditions.
(2) The paint used has poor light resistance and is easily faded or lost due to strong lighting.
(3) The paint used has poor scratch resistance and is susceptible to discoloration and loss of light during car washing and wiping.
5, the use of cars (1) the use of the environment is very bad. Cars in heavily polluted mining areas, construction sites, industries, restaurants, barbecues and other heavily polluted cities, heavily salty coastal areas, large changes in temperature, and changes in climatology, etc The damage caused the paint to fade and lose light.
(2) The parking environment is very bad. Every time a car is parked in the open air, it is naturally eroded by the wind, the sun, and the rain. This causes the paint to fade and lose its light.
(3) Influence of traffic film. The traffic film is an electrostatic layer formed on the surface of the automobile body during the running of the automobile. Because the static layer is susceptible to corrosive substances such as dust and harmful gases, this causes the paint to fade and lose its light.
6, car cleaning reasons (1) all the poor quality of cleaning agents, especially the use of strong alkaline cleaning agent will directly etch the paint.
(2) The water quality is not clean, covering corrosive matters or covering acid and alkaline matters. This will directly cause erosion of the paint surface and cause the paint surface to lose light.
(3) The water pressure is not suitable, the water pressure during flushing is too high, so that the clean layer of the body paint surface is washed and lost.
(4) The car wash method is not suitable. When washing the car, the usual ones are first flushed and then wiped. If there is no first flush, it is often due to the floating dust and sand on the body paint surface. This will make the paint surface scratched and appear scratched. Traces, so that the paint surface loses light.
7, paint care reasons (1) paint treatment is not timely, so that the paint surface is not due protection.
(2) The poor quality of the paint treatment will not protect the skin.
How to reduce the extent of paint loss?
1. Use a high-quality cleaning agent and the correct cleaning method to clean the car and remove the harmful substances on the painted surface as soon as possible.
2. After the rain and fog are over, wipe off the water droplets on the painted surface as early as possible to prevent lens effect.
3, to improve the parking environment of the car to prevent the natural erosion.
4, install a car static device to prevent the production of traffic film.
How to deal with the loss of paint finish?
1. Polishing For mildly natural aging and light scratches caused by fade, loss of light, can be cleaned and polished to eliminate the surface fade, loss of light; then wax polishing, you can restore the paint gloss.
2, wax wax, also known as color wax. The main role of this kind of wax product is color enhancement. It belongs to a single type of polymer wax and contains a small amount of color glaze. It can make the vehicle with the same color system more beautiful. Because the color wax has the functions of color enhancement, replenishment and masking, it can fade, Loss of light on the surface of the paint.
3. The lacquer refurbishment will cause the discoloration and loss of light due to the natural aging and lens effect. Due to the serious damage of the paint surface, the lacquer surface should be renovated and sprayed. Paint loss light treatment process procedures and methods.
Disposable Face Mask,Disposable Medical Masks,Disposable Mouth Mask,Disposable Protective Face Masks
Henan Diyi Medical Technology Development Co.,Ltd. , https://www.diyimedical.com