On December 6, 2016, Cummins Emissions Disposal System (China) (hereinafter referred to as “CESâ€) 2016 customer thanksgiving day and annual output of 250,000 units of post-discharge processor were held in Beijing. Representatives of service dealers from commercial vehicle OEMs such as Dongfeng Motor and Foton Automobile and representatives of users from Beijing Transit, Xianglong Bus, Chaoyang Sanitation, Fengtai Sanitation, and Haidian sanitation gathered together to witness and celebrate this with CES employees. Important historical moments.
Cummins Emissions Processing System 2016 Customer Grateful Day with an annual output of 250,000 units of post-discharge processor
CES China was officially put into production in Beijing in 2009. The first post-processing product went offline. In May 2013, it established a joint venture company with Dongfeng Motor in Shiyan, Hubei, to produce emission treatment equipment; in November 2013, it processed 100,000 units of history. Product off the assembly line; November 2014, the first annual production line of 100,000 units of post-processing products; December 2015, UA2 urea pump, a key component of the post-processing system, achieves the annual production of 100,000 units of products; December 2016 It achieved an annual sales of 250,000 post-processing products. Up to now, Cummins emissions treatment equipment in China has more than 500,000 units, with a global holding of more than 3.2 million units.
In just a few years, from zero to yes, from 100,000 to 250,000, the continuous increase in the annual sales volume of Cummins Emissions Processing System proves that Cummins has continued to move forward on the road of product and technological innovation, and it also confirms the vast number of users. Cummins emissions treatment system advanced technology and green product support and trust.
“At present, the entire society is paying more and more attention to environmental issues. Controlling air pollution has become an important responsibility of countries and enterprises. The annual 250,000 post-processors are put into use in the market, which is equivalent to the annual emission reduction of nitrogen oxides of about 120,000 tons, and annual particulate matter. Emission reduction is about 14,000 tons, which is equivalent to making nearly 10 million people in the country immune to haze during the year,†said Ms. Shi Ming, general manager of CES.
CES general manager Ms. Qi Ming
This kind of achievement can not be achieved without increasingly stringent emission regulations and standards. Since China began to fully implement the National IV emission standard in 2015, commercial vehicles have more stringent environmental protection standards, CES localized products and technologies. Started to serve more OEMs and end users. On the other hand, it is inseparable from the long-term trust and support of our customers. At present, CES China's products not only supply major domestic OEMs and engine manufacturers in China, including Dongfeng Motor, Foton Motor, FAW, Jinlong, Yutong and Hager, but also provide services for many famous foreign companies such as Hino, GAZ, PAZ, and ZCK. Supporting.
In addition to the escalation of emissions regulations and customer support, Cummins's rapid growth in post-processing equipment sales also benefits from the unique advantages of Cummins emissions processing systems:
First of all, as the world's leading comprehensive solution provider for emission treatment systems, Cummins Emissions Processing Systems has key operating agencies in the United States, China, India, the United Kingdom, Brazil, and South Africa with advanced technology research and development tools and extensive global experience. , Providing professional solutions for global OEMs, OEMs and retrofit customers to meet the increasingly stringent global diversification emission standards.
Secondly, CES understands that every customer has its own particularity. By deeply understanding the application requirements of customers, it can provide customers with complete system integration solutions. In addition, Cummins' emission control system is perfectly matched to the engine life cycle and vehicle so that customers can get the best economic benefits.
Cummins Emissions Treatment System Service Station Representative
In terms of innovative component design and productivity, CES has design and production capabilities for the core components of emission treatment systems, such as hydrocarbon injection systems, urea injection systems, urea metering modules, nozzles, and emission treatment control modules.
What is particularly important is that as a responsible global company, Cummins is very willing to share its own emission treatment technology and is willing to support it in other engine products except Cummins, and always cooperates with customers with an open and positive attitude. Actively Customers create green values ​​and help them break through various environmental barriers to enhance their competitiveness in domestic and international markets, with a view to making common progress in the industry and sharing a responsibility for environmental improvement.
In the Customer Thanksgiving Day event, CES experts and customers discussed the preparation of the Cummins Emissions Processor routine maintenance and the national five emission standards, and invited customers to visit Cummins Emissions Processing Systems in Yizhuang's post-processor production assembly plant. The product had a zero distance contact.
Cummins Emissions Processing System Customer Representative
Reducing environmental pollution, especially air pollution, is a long-term and arduous task. In this field, it is particularly important to cooperate with global forces. When US Secretary of State John Kerry visited China in 2014, Xie Zhenhua, deputy director of the National Development and Reform Commission of China, and Todd Stern, special envoy for climate change in the United States, visited Beijing Foton Cummins Engine Co., Ltd. Strengthen cooperation in addressing climate change to deliver speeches and highly recognize Cummins' efforts and contributions in the global environmental protection technology fields such as emission reduction.
Cummins has always been a pioneer in emissions technology. Cummins's post-processing products are compatible with various engine platforms ranging from 2.8L to 95L. Applications cover medium- and heavy-duty trucks, light trucks, medium- and heavy-duty passenger vehicles, construction machinery, agricultural machinery, and Malaysian generator sets. As the first industry leader to meet the emission standards of the National IV, the State V, the Euro IV, the Euro V, the European Union VI, the EPA2010, and the EPA2013, the Cummins Emissions Processing System provides a full range of emission treatment solutions, which mainly include selective catalytic converters ( SCR), diesel oxidation catalyst (DOC), partial flow catalyst (PFC) and diesel particle trap (DPF).
At present, CES's main products include the core post-processing subsystems such as the hydrocarbon injection system, urea injection system, engine and post-processing control module, and ultra-low emission system decomposition reactor. For specific markets, Cummins has also developed the EcoFitTM series of post-processing products that can adapt to the needs and needs of different markets, enabling more efficient and more compatible application options.
1.8-2.0L Three-way Catalytic Converter
1.8-2.0L Three-Way Catalytic Converter,Three-Way Catalytic Converter,High Flow Catalytic Converter,1.2L Catalytic Converter
Ningbo Hangtai Environmental Protection Technology Co., Ltd , https://www.nbhangtaikj.com