After years of struggle, China's pharmaceutical packaging machinery has made considerable progress. However, there is still a big gap between foreign equipment and foreign equipment, such as low output, unstable operation, and low standardization of parts and components. In the face of many problems, while we are considering improving our own level, it is necessary to re-clarify the future development ideas.
â— Humanization
The humanization of commodities has gradually become a standard for people to choose when shopping. = Humanized design is to fully consider people's physical and psychological factors in the design process, and pay more attention to the "convenience", "comfort", and "reliability" of the products. The evaluation of "," "value," "safety," and "efficiency" does not result in operator's discomfort, fatigue, or other physical or psychological adverse reactions or injuries during long-term use: = such as noise can be quantified The factors that cause harm to the human body are clearly defined by the country in relation to different commodities. However, the comfort and convenience of friends cannot be specifically quantified as noise. Only the “person†is used in the design process. The center is grasped by the designer. It is tested by the user.
Ergonomics is a kind of comprehensive edge discipline, which has been widely used in product design to make product design pay more attention to human factors. Its ultimate goal is to achieve the harmony and unity of “human-product-environmentâ€. Then pharmaceutical packaging equipment should consider human factors as a product to reduce human labor intensity, and this concept should be permeated in every detail of mechanical design, such as the level of the operating table, the rationalization of operating procedures, The visual effects of the operation interface (the degree of visual fatigue), the safety of the operation, the convenience of maintenance, and the convenience of adjustment. Because pharmaceutical manufacturers have more frequent replacement of pharmaceuticals due to a variety of factors, one type of packaging device cannot be used only for the packaging of one product. Due to the different forms and characteristics of different drugs, even if the packaging process is the same, different molds and different feeding methods will be involved. The pharmaceutical packaging equipment on the market today is less compatible and not widely applicable. It is generally a one-to-one package. Even if it can package different drugs, changing the mold is not very convenient. If the same or similar packaging machine is used to make one or more standard equipments, the parts that need to be replaced are made into basic units that can be operated independently, and connected to the host through the interface to make it become a host. Community (similar to the form of building blocks, which can be combined according to requirements), in actual application, the basic unit body is self-assembled according to its own needs. If this design can be realized, it is not only convenient for the operator to change the mold, but also can greatly reduce the waste, while increasing the flexibility and applicability of the machine.
â— Automation
Packaging automation has become an inevitable trend, and we are also working in this direction. But nowadays, packaging automation can only be said to be relative. To achieve true automation, we still have a long way to go. We will encounter a series of problems such as detection and automatic adjustment. Drugs with different shapes and different physical properties will encounter more problems in the detection process. The transmission and processing of data after testing will not stop at the current level. This requires the joint efforts of the electronics industry and the packaging industry. It requires pharmaceutical packaging machinery to be able to apply new electronic technologies in a timely manner to practice, and requires the joint exploration of two industries.
Some pharmaceutical machinery companies have begun to use servo motor control to replace the traditional drive system. This alternative is a reform and breakthrough in the traditional framework. The drive system controlled by the servo system can control the synchronization of the entire operation through the programming of the program. It can also eliminate the shortcomings of the traditional transmission system that can easily accumulate the accumulated error. In the debugging process, each action can also be controlled separately and also saved. The waste created by debugging. In the design of automation, we emphasize the "modular" design, which separates the relevant actions and is independently controlled by the system, and can easily realize overall control. In fact, it increases the flexibility of mechanical operation and adjustment and improves automation. . In the automation of medical packaging machinery, we have defined more and more extensive automation, more and more detailed, more and more research, from a mechanical automation to the entire packaging workshop automation, from a part of the packaging process Throughout the packaging process, the design of the entire production line and the entire workshop will become an inevitable trend. The design of the overall automated packaging workshop is actually a complete package solution for pharmaceutical packaging. It is a brand-new leap for automation. With the development of this trend, industrial PCs will also be put into use to play its powerful role. Features.
â— Humanization
The humanization of commodities has gradually become a standard for people to choose when shopping. = Humanized design is to fully consider people's physical and psychological factors in the design process, and pay more attention to the "convenience", "comfort", and "reliability" of the products. The evaluation of "," "value," "safety," and "efficiency" does not result in operator's discomfort, fatigue, or other physical or psychological adverse reactions or injuries during long-term use: = such as noise can be quantified The factors that cause harm to the human body are clearly defined by the country in relation to different commodities. However, the comfort and convenience of friends cannot be specifically quantified as noise. Only the “person†is used in the design process. The center is grasped by the designer. It is tested by the user.
Ergonomics is a kind of comprehensive edge discipline, which has been widely used in product design to make product design pay more attention to human factors. Its ultimate goal is to achieve the harmony and unity of “human-product-environmentâ€. Then pharmaceutical packaging equipment should consider human factors as a product to reduce human labor intensity, and this concept should be permeated in every detail of mechanical design, such as the level of the operating table, the rationalization of operating procedures, The visual effects of the operation interface (the degree of visual fatigue), the safety of the operation, the convenience of maintenance, and the convenience of adjustment. Because pharmaceutical manufacturers have more frequent replacement of pharmaceuticals due to a variety of factors, one type of packaging device cannot be used only for the packaging of one product. Due to the different forms and characteristics of different drugs, even if the packaging process is the same, different molds and different feeding methods will be involved. The pharmaceutical packaging equipment on the market today is less compatible and not widely applicable. It is generally a one-to-one package. Even if it can package different drugs, changing the mold is not very convenient. If the same or similar packaging machine is used to make one or more standard equipments, the parts that need to be replaced are made into basic units that can be operated independently, and connected to the host through the interface to make it become a host. Community (similar to the form of building blocks, which can be combined according to requirements), in actual application, the basic unit body is self-assembled according to its own needs. If this design can be realized, it is not only convenient for the operator to change the mold, but also can greatly reduce the waste, while increasing the flexibility and applicability of the machine.
â— Automation
Packaging automation has become an inevitable trend, and we are also working in this direction. But nowadays, packaging automation can only be said to be relative. To achieve true automation, we still have a long way to go. We will encounter a series of problems such as detection and automatic adjustment. Drugs with different shapes and different physical properties will encounter more problems in the detection process. The transmission and processing of data after testing will not stop at the current level. This requires the joint efforts of the electronics industry and the packaging industry. It requires pharmaceutical packaging machinery to be able to apply new electronic technologies in a timely manner to practice, and requires the joint exploration of two industries.
Some pharmaceutical machinery companies have begun to use servo motor control to replace the traditional drive system. This alternative is a reform and breakthrough in the traditional framework. The drive system controlled by the servo system can control the synchronization of the entire operation through the programming of the program. It can also eliminate the shortcomings of the traditional transmission system that can easily accumulate the accumulated error. In the debugging process, each action can also be controlled separately and also saved. The waste created by debugging. In the design of automation, we emphasize the "modular" design, which separates the relevant actions and is independently controlled by the system, and can easily realize overall control. In fact, it increases the flexibility of mechanical operation and adjustment and improves automation. . In the automation of medical packaging machinery, we have defined more and more extensive automation, more and more detailed, more and more research, from a mechanical automation to the entire packaging workshop automation, from a part of the packaging process Throughout the packaging process, the design of the entire production line and the entire workshop will become an inevitable trend. The design of the overall automated packaging workshop is actually a complete package solution for pharmaceutical packaging. It is a brand-new leap for automation. With the development of this trend, industrial PCs will also be put into use to play its powerful role. Features.
Smart Door Lock Part,Intelligent Door Lock Motor Accessories,Smart Door Lock Accessories,Intelligent Door Lock External Accessories
Dongguan Shangjie Precision Hardware Co., Ltd , https://www.shangjiecnc.com