Introduction:
Our linear vibrating screen is a kind of small and medium size multi-layer screening machinery. Its performance has reached the international advanced level. Any dry material with a diameter of 0.074mm-20 mm could be handled. The maximum granule diameter should be less than 30 mm. As a multi-layer screen, this machine could come with seven layers of screen at most.
Principle:
The linear vibrating screen is composed of screen box, screen frame, vibration motor, shock absorber and machine base. The two same vibration motors, as the vibration providers, are fixed on the top of screen box. They rotate synchronically in reverse directions.
The eccentric blocks driven by the motors could provide centrifugal force, whose component force moves back and forth along the casting direction. Thus the screen device supported by the shock absorbers can move linearly. And the material on it moves forward straightly when tossed upward. When falls into the screen frame again, the material will move forward quickly and penetrate the screen in a fluffy state. Desirable screening performance can be achieved simply by choosing suitable screens for the linear vibrating screen.
Main Feature:
 |
Name: Horizontal Vibrating Motor Two same type of horizontal vibrating |
1. The screening precision is great, while the blocking rate of screen is less than 10% in average.
2. The screen frame is usually made of wood, or steel or stainless steel. If the mesh diameter is larger than 2 mm, and the production capacity is high, the stainless steel frame will be better.
3. Enclosed structure is adopted for the linear vibrating screen to avoid particulate matter pollution to the air.
4. The low energy consumption and low noise (73-80 dB) make the machine quite eco-friendly.
5. The screen is woven by stainless steel wire, so its service life is quite long and the maintenance is simple. It can be used in single layer for multi-layer (7 layers at most).
6. The motor could be mounted either at the bottom or on the side of the vibrating body.
Main Technical Parameters
| Model | Screening area (mm) | Layer | Mesh size(mm) | Capacity (t/h) | RPM | Double amplitude (mm) | Power (kw) | Dimension(mm) |
| DZSF520 | 500×2000 | 1 | 2-200 | 0.05-5 | 960 | 6-7 | 2×0.4 | 2140×808×848 |
| DZSF520-2 | 2 | 0.05-5 | 960 | 6-7 | 2×0.4 | 2199×808×878 | ||
| DZSF520-3 | 3 | 0.03-5 | 960 | 4-6 | 2×0.4 | 2256×808×938 | ||
| DZSF525 | 500×2500 | 1 | 0.06-8 | 960 | 5-7 | 2×0.4 | 2642×808×848 | |
| DZSF525-2 | 2 | 0.06-8 | 960 | 4-6 | 2×0.4 | 2699×808×878 | ||
| DZSF525-3 | 3 | 0.06-8 | 960 | 6-8 | 2×0.75 | 2750×808×938 | ||
| DZSF525-4 | 4 | 0.1-15 | 960 | 5-7 | 2×0.4 | 2813×808×1000 | ||
| DZSF525-5 | 5 | 0.08-15 | 960 | 5-7 | 2×0.4 | 2883×808×1060 | ||
| DZSF525-6 | 6 | 0.07-15 | 960 | 6-8 | 2×0.75 | 2953×808×1120 | ||
| DZSF1020 | 1000×2000 | 1 | 0.12-20 | 960 | Tire Debeader Tire Debeader adopts the motor and twin hooks, design to pull out bead wires at 3 times the speed of the single hook debeader. Tire Wire Remover Machine adopts the motor and twin hooks, design to pull out bead wires at 3 times the speed of the single hook debeadeMechanical tansmission and round hook design, high efficient and small occupation area. If you need Tire Steel Wire Remover, welcome to contact SUMAC.
Tire Debeader,Tire Wire Remover Machine,Tire Wire Drawing Remover,Tire Steel Wire Remover SUMAC AUTO RECYCLING EQUIPMENT CO., LTD , https://www.autorecyclingchina.com |
