The most commonly used metal duct has a duct and flexible duct two kinds. Iron metal duct thick skin is made 1.2 ~ 3mm, typically a 3m, with coupling flanges, the clamp rubber gasket, which can be used under negative pressure ventilation duct without modification, but it is easy to joint leakage It is not convenient to move. The flexible air duct is made of glass cloth as a lining, and the outer surface is pressed with plastic or rubber. The flexible air cylinder is acid and moisture resistant, light in weight and foldable. It is 10m long and has a small air leakage. It is currently widely used in mines.
XMC HAC5000-10 1'' central pneumatic Air compressor parts air filter regulator lubricator With Quick Fitting
Specification
|
Order No.
|
HAC5000-10
|
|
Ensured Pressure Resistance
|
1.5MPa (15kgf/cm2)
|
|
Highest Working Pressure
|
1.0MPa (10kgf/cm2)
|
|
Ambient and Fluid Temperature
|
5~60℃
|
|
*Filter Precision
|
25μm
|
|
Recommended Oil Use
|
Turbine No.1 Oil ISOVG32
|
|
Container Material
|
Polycarbonate
|
|
Protective Cover
|
Available
|
|
Pressure Regulating Range
|
0.05~0.85MPa |
|
Valve Type
|
With Overflow
|
Our advantages
1. OEM available.Experienced pneumatic product suppler.
2. Professional design team and sales department for your service.100% test for air pressure and inspection for product appearance before shipment.
3. Alibaba supplier , factory recognized by CE/FSC/ISO9001 and so on.
4. 7/24 Service for you , all the question will be dealt within 24 hours.
5. Location advantage: Nearby Ningbo port, the second largest port in China, convenient transportation and low cost, and close to Shanghai, convenient for customers to visit our factory.
Air Compressor Fitting,Pneumatic Air Compressor Fitting,Air Compressors Steel Pipe Fitting,Plastic Air Compressor Fitting
Hangzhou Hanray Industry Co., Ltd , https://www.airsuspensionride.com