Instructions:
1. Open the cover of the box. The box cover is equipped with a multi-value kV meter and a special cable. Lift the box and the voltage divider is installed on the bottom of the box.
2. Connect the ground wire to the voltage divider grounding column first. FRC high voltage divider then connects one end of the special cable to the voltage divider and the other end to the multi-valued kV meter.
3, will be tested with the pressure divider even pressure ring firmly connected.
4, check the wiring is correct, strictly observe the operating distance, connect the high pressure can be measured.
5, high voltage measurement voltage divider multi-value kV meter reading unit is "KV" First press the power button, display "O". Press DC DC button to display DC voltage value; press AC peak button to display AC peak value; press AC True RMS button to display AC true RMS value; press AC peak button to display peak voltage value.
6, multi-value kilovolt meter display window, if the upper left corner shows "â†" when the 9V battery should be replaced.
Technical indicators:
1. Compliance with the standard: DL/T 846.1-2004
2. Voltage Rating: AC: 50kV DC: 50kV
3. Measurement Accuracy: AC: ± 1.5%
DC: ±1.0%
4. Working environment: Temperature: -5 °C - 40 °C
Humidity: ≤85%
5. Input impedance: 800MΩ
6. Output impedance: 0.8MΩ
7. High and low pressure divider ratio: 1 000:1
â— Used in aeroengine oil system.
â— All stainless steel construction.
â— Low lohm ,High flow capability.
â— high contamination carrying capacity for maximum protection.
â— The size can make to order according to the customer's demand.
Duplex Filter Element,Aluminum Casting Cap,Corrugation Filter Element,Hydraulic Filter Element
XINXIANG PINGYUAN AVIATION HYDRAULIC EQUIPMENTS CO.,LTD , https://www.coupling.pl