Recently, Luoyang Hailing Automobile Sales & Service Co., Ltd. came to a Kia show Seoul 2010 1.6L tiptronic GL (National IV) car, such a car, it is difficult for everyone to take it seriously, after all, this hatchback car has been called "Big hamster". Let's take a look at the style of this new style urban crossover.
For detailed parameters of used Kia Xiul, please see the following table
Kia-Xiuer's air intake grille uses a sporty front net to keep the front face more dynamic, while adding a chrome trim to the exterior of the “tiger-style†family. The doorknob has also been chromed to highlight the charm of high-end in the details.
Sauer interiors: The entire central control and instrumentation area is still made of hard plastic materials, but the touch does not feel cheap. The deep-tone interior color scheme is also more in line with the self-style of Xiuer's self-proclaimed personality. It is very easy to be loved by young people.
In terms of power, Kia Sauer carries a 1.6-liter engine and is equipped with a 5-speed automatic transmission. The maximum power is 90.4kW (123 hp)/6300rpm, and the maximum torque is 155Nm/4200rpm. The high parameter is rare in the domestic displacement, which of course is inseparable from the CVVT technology, so it is also the highlight of the engine. .
At present, the five most commonly used thermosetting plastics in various fields are PU, epoxy resin (EP), silicone, unsaturated polyester (UP) and phenolic resin (PF).
Thermosetting plastic has the following advantages:
Thermosetting plastic has a large rigidity and is extremely elastic and plastic deformation.The temperature has little influence on stiffness, and under the same load and temperature, the creep variable is much smaller than thermoplastic.Good heat resistance;The plastic parts are quite stable when heated.The size of the plastic parts is good. Thermosetting plastic is less affected by temperature and humidity, and Thermosetting plastic can be reduced after forming, making Thermosetting plastic easy to make plastic parts with high precision than thermoplastic ruler.Excellent electrical performance.Resistance to arc and voltage, etc.Good corrosion resistance, weak acid, weak base and organic solvents;Good processability, can be processed by various molding methods and other advantages.
Most thermosetting plastics have the following characteristics:
(1) excellent chemical resistance.
(2) it is usually brittle hard plastic, which can be filled with various fillers to form composite materials.
(3) compared with thermoplastic resin, the molding cycle is longer.
(4) all kinds of modification can be carried out, depending on the combination of resin, crosslinking agent, additive, etc., which can form composite materials with different properties.
(5) good heat resistance, the use of high temperature, Tg of thermosetting polyimide (PI) is about 350 ℃.
(6) can be used as raw materials to meet the application of various fields.Only 5% is used as injection molding material.
(7) the waste is generally used as filler after pulverization, which is difficult to recycle and pollutes the environment.
Due to the high heat resistance of thermosetting plastic, good dimensional stability, good line performance, anti-aging properties are better than thermoplastic plastic and low price, so it is widely used.The disadvantage is that the mechanical properties are poor and need to be enhanced.
It is mainly composed of thermosetting resins, which are involved in various necessary additives to form the plastic of the products.In the process of manufacturing or forming, the liquid will be liquid, which will not melt after curing or melt or soften again.Common thermosetting plastics include phenolic plastic, epoxy plastic, amino plastic, unsaturated polyester, alkyd plastics, etc.Thermosetting plastic and thermoplastic plastics constitute two major components of synthetic plastic.
Thermosetting plastic heating for the first time can soften the flow, heated to a certain temperature, react a crosslinking reaction and curing hardens, this change is irreversible, since then, heating again, already no longer soft flow.It is the use of this characteristic to make the molding process, using the plasticization flow of the initial heating, filling the cavity under pressure, and solidifying to become the product that determines the shape and size.
Thermosetting plastic is distinguished by a chemical reaction that is hardened by heating, pressing or adding the hardener at a definite temperature.After hardening, plastic chemical structure changes, the texture is hard, dissolves in the solvent, heating also no longer softens, if the temperature is too high then decompose.In thermoplastic plastic, the chains of resin molecules are linear or branched, and there is not any chemical bond between the molecular chains, which soften the flow when heated.The process of cooling and hardening is a physical change.
Formaldehyde cross linked plastic includes phenolic plastic, amino plastic (such as urea-formaldehyde - melamine - formaldehyde, etc.).Other cross linked types of plastic include unsaturated polyester, epoxy resin, prevalence, diallyl ester resin, etc.
The commonly used thermosetting plastics are phenolic resin, urea-formaldehyde resin, melamine resin, unsaturated polyester resin, epoxy resin, silicone resin, polyurethane, etc.
Production:Phenolic resin PF (Bakelite sheet)
Phenolic resin is a part of the longest plastic varieties in history, commonly known as bakelite or electric wood, and the appearance is yellowish or black, which is the typical representative of thermosetting plastic.Bakelite sheet molding often use a variety of filling materials, according to different filling materials used, the product performance is also different, Bakelite sheet as molding material, mainly used in the field of need heat resistance, but also as a bonding agent used in plywood, grinding wheel and the brake pads.
Thermosetting Plastic,Thermoset Molding Plastic,Mould Thermosetting Plastic,Thermoplastic Type Plastic
Dongguan Noegem Plastic Products Co.,Ltd , https://www.noegempLastic.com