This code specifies the beneficiation plant screw compressor safe operation and content requirements.
This procedure is applicable to the position of screw air compressors in the concentrator.
2 content
2.1 Operators must be employed after passing safety training; wear safety helmets and employee protection kits before they are employed. Employees must wear three tight dresses; women workers must be in safety helmets, not wearing shorts, high heels, and slippers.
2.2 The operator should inspect the safety devices in strict accordance with the procedures described in the operating manual.
2.3 Perform maintenance according to the specified time to ensure normal operation after power on.
2.4 The operator should understand the principle, structure, performance, fault characteristics, causes and prevention methods of the machine.
2.5 All kinds of safety accessories (such as safety valves, pressure gauges, thermometers, etc.) must be safe and effective, and the wind and oil pipes must be unblocked.
2.6 During operation, check the air pressure, oil pressure, and machine operation status frequently, and do diligent, diligent, and diligent recording.
2.7 All water remaining in the cylinder and cooler must be drained after the winter shutdown.
2.8 Before working on the electrical system, be sure to use the manual disconnect switch to shut off the system power.
2.9 Do not operate the air compressor above the exhaust pressure specified by the air compressor.
2.10 Once pressure has been released through the safety valve, the cause must be ascertained immediately.
2.11 The central control room must be notified before inspection, maintenance and overhaul.
2.12 Before servicing the machine, the power must be turned off, the warning sign should be hanged, and the residual pressure of the gas in the machine should be released.
2.13 Maintenance After the machine has been completed, the various covers and covers must be reinstalled.
2.14 When the machine is found to be malfunctioning, the power should be cut off immediately and reported to the relevant leaders in time.
2.15 Responsible for the environmental sanitation of the scope of this post, clean and hygienic work, and achieve civilized production.
2.16 Fill in the original record carefully and the writing is clearly intact.
2.17 Strictly implement the handover system.
1. Quality assurance
-100% pure PVC raw material without any additive, no recycled material.
-Advanced producing technology, our flooring owns a high dense structure and excellent compression resistant rate.
-High-tech wear resisting performance processing technology, ensures wear resistance capacity and long life span.
-Annual sales of over 4 million square meters. Preferred brand choice for professional sports venues.
2. Clean and Eco-friendly
-No harmful substances, such as Formaldehyde, Soluble Volatile and Heavy Metals. ISO 14001 certified.
-Remarkable anti-pollution capacity. Reduce the waste of natural resources by frequent cleaning.
-Low maintenance cost, easy to clean without using wax.
3. Safe and comfortable
- Elastic cushion with stable support structure, ensures comfortable foot feeling and good optimal vertical force, thus provide excellent sports experiences for players.
-Excellent shock absorption provides best protection for the player`s knees, spines, joints and cartilages.
-Friction coefficient rate is between 0.4-0.7. Easy to balance the force of ground grip and good at slippery resistance. Suitable for different kinds of Ball games and other sports.
4. Easy installation
-1.8 meter in width to reduce welding connections. With elegant apperance and stable structure.
-With operable weight, the whole roll could be directly laid on existing concrete grounds or wooden floors. The overall visual effect is very good.
Gym Room,Gym Room Sports Flooring,Vinyl Gym Room Sports Flooring,Gym Room Flooring
Shijiazhuang Enlio Sports Goods Co., Ltd. , https://www.enliosports.com