Car brake maintenance knowledge

It is well known that the brake is the braking system of the car. It is directly related to the driver's driving safety and its own safety. Therefore, we are indispensable for the maintenance of the car brake. Many novice drivers do not pay attention to this aspect of maintenance. The following is small. I have compiled some details about the maintenance of the car brakes for the riders, and the riders should pay attention to the relevant issues in this regard. Avoid problems such as brake failure during driving, and once this problem occurs, it is a serious car accident.

Car brake maintenance knowledge

Brake disc (brake disc) replacement cycle

Generally, the front brake discs are inspected every 60,000 km, and the rear brake discs are inspected every 120,000 km. There may be slight differences in the maintenance intervals between different models. You can ask the corresponding car brand supplier or consult a professional car modification agency based on your vehicle model data. When replacing the front/rear brake discs, the front/rear left and right wheels need to be replaced at the same time to ensure stable braking performance.

The necessity of replacing the brake disc (brake disc)

According to the data, in the 2011 traffic accident, the Ministry of Public Security counted as many as 32% of accidents caused by brake system problems, and the death toll was as high as 30,000. So at a critical moment, the distance between safety and danger may be only 2 meters, 1 meter or 0.5 meters. Think about it, if there is a traffic accident, the brain's instinctive reaction is braking. At this time, the brake system is not sensitive, and the consequences are really unimaginable. It can be said that the brake system is the most important system for vehicle safety during vehicle travel. For this reason, the owner must check it from time to time and take good care of it.

Car brake maintenance knowledge

Brake disc (brake disc) maintenance precautions

1. When selecting a brake disc, first understand the information about your model to determine the brake disc model, otherwise it will not be installed smoothly;

2, pay attention to the number of brake discs purchased, usually when replacing the front brake disc, the front left and right wheels need to be replaced at the same time, the rear brake disc is the same.

3. The replacement of the brake disc must replace the two coaxial wheels at the same time. After replacing the new brake disc, it is necessary to avoid strong braking. It takes about 1000 km to achieve the working state of the brake pads and brake discs.

4. Whenever you check the brake pads, pay attention to the condition of the brake discs to ensure the stability of the brake system.

5, special season inspection and maintenance, in the rainy and humid season, you should check the brake disc condition to avoid serious rust; before and after long-distance driving, the brake system should be carefully examined.

6, pay attention to the abnormal situation of the brake system during driving, such as abnormal brakes, brakes and other conditions, to avoid brake failure, should be repaired in time to find the cause.

Car brake maintenance knowledge

The above is some of the knowledge about car brake maintenance that Xiaobian has compiled for the riders. In the usual time, the riders must pay attention to the relevant maintenance in this area, and travel safely.


Magnetic Separator

Magnetic cleaner:

1 5CX-5 Magnetic Separator high-performance clod magnetic graders is to separate clod from grain.

2 It is based mainly on grain mixed with mud and clod, with the appropriate speed through a closed strong magnetic field, when the material spilled out, due to the different strength of attraction of the magnetic field, and shed the near and far, to separate clod from grain.

3 Advantages:

1, 304 stainless steel sheet metal machine, magnetic closure strict, less magnetic flux leakage.

2, the magnetic field strength of magnetic roller is greater than 14,000 gauss. The magnetic field strength, large magnetic, good magnetic effect

3, the wide magnetic surface design, width of magnetic election surface is 1300m, to ensure that the processing capacity and improve the magnetic effect.

4, the original design of bulk grain equipment, bulk grain uniform, no maintenance, greatly reducing the losses caused by the vibration feeder damage.

5, equipped with the most advanced frequency conversion regulator, according to the type of material and the different iron content in clods, easily transferred to the best of the running speed.

6, the drive roller, magnetic roller, tension rollers after all the fine cars fine grinding to ensure the belt smooth running, no deviation.

7,We are the 5XCX Magnetic Separator ,Magnetic Destoner Chinese supplier.

Model

5CX-5

Productivity(as wheat)

5000 KG/H

Dimension( L×W×H )

1800×1800×2100 mm

Electric(Voltage)

380V 50Hz

Power

1.05 kW

Force

≥15000 Gs

Dust

≥ 99%

Weight

800 KG

Magnetic Separator

Magnetic Destoner

Magnetic Separator

Magnetic Separator,Grain Seeds Magnetic Separator,Magnetic Separator Machine,High-Intensity Magnetic Separator,Seed Separator

Hebei HELIDA Grain Selecting Machinery Technology Co., Ltd. , https://www.grainseedscleaner.com