M Series Valve Electrical Installation Failure and Troubleshooting

1. The motor does not work

Explanation of reasons: a. The power cord is disconnected or lacks phase. Remedy: a. Check the power cord

b. Control box control line failure b. Exclude line failure

c. Failure of stroke or torque control mechanism c. Test with universal meter

2. The motor stops during operation

Reason explanation: a. The valve is faulty Remedy: a. Check whether the valve is stuck

b. Overload of the electric device, operation of the torque control mechanism b. Excluding the overload phenomenon, increasing the setting torque appropriately

3 motor overheated or buzzing

Explanation of reason: a. The motor's continuous working time is too long. Remedy: a. Immediately stop the operation and cool the motor.

b. One phase disconnection b. Check the power cord to ensure that all three lines have power

4. After the valve is in position, the motor will not stop, the Light will not be on or the travel cannot be controlled.

Explanation of reasons: a. Failure of the stroke or torque control mechanism. Remedy: a. Check the stroke or torque control mechanism

b. Improper adjustment of stroke control mechanism b. Re-adjustment of stroke control mechanism

c. Phase sequence error c. Reverse phase sequence

d. The contactor or iron is not released d. Clean or replace the contactor

5. Remote valveless signal

Explanation of reason: a. Potentiometer gear set screw loosening Remedy: a. Tighten potentiometer gear set screw

b. Remote potentiometer failure b. Check the replacement potentiometer

6. The opening degree indicates the failure of the organization

Explanation of reason: a. Potentiometer damage Remedy: a. Replace

b. Engaging and gear loosening b. Tightening set screws

c. Bad conductor contact c. Replacement of new wire

7. The output shaft does not meet the requirements

Cause explanation: The power supply phase sequence is reversed. Remedy: Exchange any two power cords

For people work in the city where traffic jam certainly will take place during the beginning of on-work or off-work time,driving a motorcycle home will be the best choice for people who like time efficiency.Expecially,Yamaha YBR125 is good value for money.Gentle, easy going and practical, it`ll see you through your test and, if you want, beyond. The Yamaha YBR125 is best as a city ride, there`s enough poke to wind you through rush hour traffic and the handling`s not bad either.Sonora Motors now can supply parts for YBR125, such as Yamaha YBR125 high performance Ignition Coil, YBR125 turn signal,YBR125 Cylinder,etc.

YBR125 Motorcycle Part

YBR125 Cylinder,YBR125 Carburetor,YBR125 Brake shoe

SONORA MOTOR COMPANY , https://www.sonoramotor.com