Paperless recorder repair essential knowledge

Abstract: Paperless recorders are input signals that need to be monitored and recorded at industrial sites, such as flowmeter flow signals, pressure transmitter pressure signals, thermal resistance and thermocouple temperature signals, etc., through high performance 32-bit. The ARM microprocessor performs data processing. On the one hand, it is displayed on a large-screen liquid crystal display screen in various forms. On the other hand, these monitoring signal data are stored in the built-in large-capacity memory chip of the local machine so that Data and graphics queries, pages, and prints are performed directly on this recorder. The paperless recorder eliminates the stylus pen and recording paper used in traditional paper recorders, improves the quality of the recorder itself, enhances the stability and reliability of the recorder, and more importantly, reduces the operating cost of the recorder. . In the process of using, there will still be many problems. This article mainly describes some maintenance methods of paperless recorder for your reference.

When using a paperless recorder , it may be due to the long time used or our abnormal operation may lead to equipment problems, then in this case you need to understand the basic principles of some paperless recorders . There are several points to note in maintenance:
1. When disassembling and adjusting the instrument, record the original position for recovery.
2. When troubleshooting a paperless recorder in a wet environment, it is necessary to measure whether the various points on the printed circuit are unobstructed, because the main fault in this case is corrosion of the copper foil.
3, with a multimeter ohm block, remember not to live measurement.
4. When repairing precision paperless recorders , if you accidentally fly a small part, you can use magnet scanning and line-of-sight scanning methods.
5. When detecting the filter capacitor in the power supply, the positive and negative electrodes of the electrolytic capacitor should be short-circuited first, and the short-circuit line should not be used to discharge the capacitor instead of the lead wire, because it is easy to blow the core wire. It is possible to take a 220V, 60 to 100W lamp with a cap lead, which is connected to both ends of the capacitor. The lamp will flash at the moment of discharge.
6. When inspecting the internal circuit of the paperless recorder , if the contacts and circuit boards of the mounting components are coated with insulating varnish, the common parameters of the parameters can be measured by using ordinary hand-sewn welding on the test leads of the multimeter so that the paint can be directly measured. Point, without peeling off the paint layer.
7. Do not hot plug various control boards and plugs. In the case of power-up, the plug-in control board will generate a strong induced electromotive force. At this moment, the instantaneous counter-attack voltage is very high, and it is easy to damage the corresponding control board and plug.
8, do not blindly knock overhaul during maintenance, so as not to expand the fault, the more repair and more bad.
9. When using logic pens and oscilloscopes to detect signals, be careful not to make the probes contact the two measurement pins at the same time to form a short circuit.
With this knowledge, when we encounter some simple problems, even if we are not professional repair personnel, we can rest assured to repair the equipment.

Plastic Coated Electric Kettle

Plastic Coated Electric Kettle

The original stainless steel double wall electric kettle. This kettle comes with 100% stainless steel interior. Outside made by plastic for protect your hand in case that the hot stainless steel will scald your hand. No plastic in contact with hot water. The spacious kettle has a volume of 1.8 liters which give ample space to boil tea, coffee or soups in minutes. Lets you boil a huge quantity of liquid at a time and helps save time and electricity.

· Stainless Steel Body With Plastic Outside: Ergonomic in design, the electric kettle has a sturdy handle with smart contours to make your grip a firmer one. The stainless steel finish gives a glossy feel and boasts a rust-free performance. This stainless electric kettle comes with a convenient spout so that liquid can be easily poured from it directly into a container. It avoids any spillage and thus prevents your kitchen from getting messy.

· 360 degree rotational body with separated base: Enjoy the ease and convenience of cord-free serving with this stylish stainless steel kettle. Perfect for placing on the table for gatherings or leaving on the base for worry-free hot water any time of day.

· Automatic shut off when water boils or dry: This overheat safety protection feature of the electric Kettle helps to prevent hazardous accidents. The cordless electric kettle switches off if the water inside the kettle dries up. It also saves on electricity as it uses very less power.

· Lightweight and Portable: Carry your kettle anywhere to enjoy a warm cup of coffee or tea away from your home. Kettle not only looks good but maintains a high standard in terms of durability. Lightweight and its small dimensions snugly fit in your bag. Portable and small in size, this electric kettle makes a perfect travel companion.

· Cool touch Exterior: With out cool-touch design. You`ll be able to touch the outside of the kettle even when it`s boiling. There`s no risk of getting accidentally burnt, so it`s perfect for homes with young children.

Application:

Enjoy your coffee.

Cook egg for morning.

Boil some lemon tea

Plastic Coated Electric Kettle,Household Plastic Kettle,Colorful Water Kettle,Auto Shut-Off Electric Kettle

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectrics.com