New Generation AST-600 Copper Granulator Introduction
Waste copper/cable granulator(also named waste copper wire/cable recycling machine) is a kind of machinery used to recycle waste & scrap copper wire and cables to get copper granule and plastic. The machine is popular in America, Europe, Australia, Canada and other advanced countries.
AST- 600 Copper Wire Recycling Machine Features
1.Wide application: The material of the waste wires can be telephone wire, household electric wire, automotive wire and cables whose diameter should be within 20mm.
2.Easy Operation: This type of waste cable recycling machine needs no water during the whole process. What you need to do is only to put the waste wire/cable into the feeding device. Then the copper and plastic will be separated by vibrating separator, and the copper purity can be 99.9% at least.
3.Labor-saving: Copper Granulator is an integrally combined machine which needs only 1-2 workers to operate. The machine is of compact structure, less land occupancy and labor-saving.
4.Customized services: We can customize different voltage motors of 220V/380V/480V. We can also customize motor according to your special requirements.
5.Convenient Shipment: All the units are installed on the underbed to form the whole machine which is very easy for transporting. The machine is well adjusted before shipping, so the customer only needs to connect it to the power supply before production.
AST- 600 Copper Wire Recycling Machine Structure Features
1.Cutting Blade: The cutting blade of crusher is made of alloy steel imported from Japan.
2.Vibrating screen: This screen is made of 304 stainless steel, durable and easy to clean. Besides, the vibrating screen device is in a enclosed structure which ensures the high efficiency in screening process.
3. Blowers Increased: One of the reason why new generation 600 has improved separating efficiency is that there is another blower under the screen which strengthens the separating power.
Copper Wire Recycling Procedures
1. Copper Wire Crushing process
Put waste copper wire / cable into crusher to grind the wire into granular mixture. The crusher blade of high quality would change the wires or cable into particles.
2. Copper Clad Collecting
After crushing, the mixture of copper and plastic will be blown to the separating process by a high pressure blower. The crushed granule particle are driven by two vibrating motor. Because of different gravity, the copper clad is easily floating up and collected by the blower.
3. Separating and Copper Granule Collecting Process
The vibrating screen is tilt installed which makes the separating process much easier. Also, during vibrating process, a blower will pull the plastics out from one of the discharging hole. Then the copper granule will be filtered by vibrating screen of 150 mesh.
Good News
We would send customer a set of cutting blades(including 10 rotary blades and 4 fixed blades) and screen for free.
Price List about Copper Price for Reference
| Copper Type | Copper Grade | Price Range |
| Insulated Copper Wire | Low grade | from $1.00 to $2.90 |
| High grade | from $3.00 to $5.00 | |
| General Copper | Clean | from $5.50 to $7.00 |
| Mixed | from $5.00 to $6.00 |
| Model | AST-600 |
| Work condition | 380 V/3 Phrase/50 HZ(could be customized) |
| Purity rate | >99.9% |
| Wire dia processed | 0.2-20Â mm |
| Size of products | 4 mm approximately normally |
| Capacity | 300-400Â kg/hour |
| Dimension | 4300*1950*2400Â mm |
| Total Power | 52.36Â kw |
| Weight | 3400Â kg |
New Generation AST-600 Copper Granulator for saleNew Generation AST-600 Copper Granulator Introduction
Waste copper/cable granulator(also named waste copper wire/cable recycling machine) is a kind of machinery used to recycle waste & scrap copper wire and cables to get copper granule and plastic. The machine is popular in America, Europe, Australia, Canada and other advanced countries.
AST- 600 Copper Wire Recycling Machine Features
1.Wide application: The material of the waste wires can be telephone wire, household electric wire, automotive wire and cables whose diameter should be within 20mm.
2.Easy Operation: This type of waste cable recycling machine needs no water during the whole process. What you need to do is only to put the waste wire/cable into the feeding device. Then the copper and plastic will be separated by vibrating separator, and the copper purity can be 99.9% at least.
3.Labor-saving: Copper Granulator is an integrally combined machine which needs only 1-2 workers to operate. The machine is of compact structure, less land occupancy and labor-saving.
4.Customized services: We can customize different voltage motors of 220V/380V/480V. We can also customize motor according to your special requirements.
5.Convenient Shipment: All the units are installed on the underbed to form the whole machine which is very easy for transporting. The machine is well adjusted before shipping, so the customer only needs to connect it to the power supply before production.
AST- 600 Copper Wire Recycling Machine Structure Features
1.Cutting Blade: The cutting blade of crusher is made of alloy steel imported from Japan.
2.Vibrating screen: This screen is made of 304 stainless steel, durable and easy to clean. Besides, the vibrating screen device is in a enclosed structure which ensures the high efficiency in screening process.
3. Blowers Increased: One of the reason why new generation 600 has improved separating efficiency is that there is another blower under the screen which strengthens the separating power.
Copper Wire Recycling Procedures
1. Copper Wire Crushing process
Put waste copper wire / cable into crusher to grind the wire into granular mixture. The crusher blade of high quality would change the wires or cable into particles.
2. Copper Clad Collecting
After crushing, the mixture of copper and plastic will be blown to the separating process by a high pressure blower. The crushed granule particle are driven by two vibrating motor. Because of different gravity, the copper clad is easily floating up and collected by the blower.
3. Separating and Copper Granule Collecting Process
The vibrating screen is tilt installed which makes the separating process much easier. Also, during vibrating process, a blower will pull the plastics out from one of the discharging hole. Then the copper granule will be filtered by vibrating screen of 150 mesh.
Good News
We would send customer a set of cutting blades(including 10 rotary blades and 4 fixed blades) and screen for free.
Price List about Copper Price for Reference
| Copper Type | Copper Grade | Price Range |
| Insulated Copper Wire | Low grade | from $1.00 to $2.90 |
| High grade | from $3.00 to $5.00 | |
| General Copper | Clean | from $5.50 to $7.00 |
| Mixed | from $5.00 to $6.00 |
| Model | AST-600 |
| Work condition | 380 V/3 Phrase/50 HZ(could be customized) |
| Purity rate | >99.9% |
| Wire dia processed | 0.2-20Â mm |
| Size of products | 4 mm approximately normally |
| Capacity | 300-400Â kg/hour |
| Dimension | 4300*1950*2400Â mm |
| Total Power | 52.36Â kw |
| Weight | 3400Â kg |
Land Drilling Rig Zj20 with Drilling Collar for Sale
Land Drilling Rig with Mud Pump for Sale
Popular Hydraulic Rotary Drilling Rig for Land Drilling Hole Drilling Pile Drilling
Xj450 Workover Rig /Land Drilling Rig Full Spec for Drilling Company
The offshore workover rig has high reliability, strong wind resistance, good anti-corrosion performance, high explosion-proof requirements, zero emission of pollutants, and meets the requirements of offshore workover operation.
Product Introduction
1. The offshore workover rig has diesel engine, dc, ac, hydraulic and compound driving modes.Diesel engine efi engine selects the caterpillar dangerous environment, suction/exhaust, control system with explosion-proof modification, satisfying a â…¡ explosion-proof requirements, transmission case choose allison hydraulic transmission box, reasonable matching, high transmission efficiency, easy to control.
2. Modular structure is adopted for the base, which is divided into drill floor and lower base. The platform deck has longitudinal sliding rail and the upper part of lower base has transverse sliding rail, which can achieve longitudinal and transverse movement and meet the requirements of platform cluster well operation.
3. The drilling platform, base, derrick, winch, driller's room, power unit, high-pressure manifold, solid control system, well control system and other equipment of the workover rig are designed with modular design, and the third-party product inspection certificate is obtained to meet the classification requirements of offshore platforms.
4. The drawworks adopts a single drum structure, the main brake is a hydraulic disc brake (single or double disc), and the auxiliary brake is a push-disc (water-cooled) or clamp-disc (air-cooled) pneumatic brake.
5. The mast adopts tower derrick or two-section set mast mast derrick, hydraulic cylinder lifting and stretching, the derrick body structure is treated with hot dip zinc or hot spray aluminum, and the outer surface is coated with Marine anti-corrosion paint.
6. The offshore workover rig has high reliability, strong wind resistance, good anti-corrosion performance, high explosion-proof requirements, zero emission of pollutants, and meets the requirements of offshore workover operation.
7. Classification society certification can be obtained according to user requirements, such as CCS, DNV, BV, etc.
Oil And Gas Drilling Rig(workover-land rig-offshore)
Gas Rig,Natural Gas Rigs,Rig Oil And Gas,Oil And Gas Drilling Equipment
Henan YikYui Prospecting Machinery Co., Ltd , https://www.yikyui-rig.com