Recently, GAC Fiat Chrysler Automobile Co., Ltd. filed a recall plan with the AQSIQ, and will recall some imported Fiat Filip cars from 2012 to 2014 from October 31, 2015 (production date: October 25, 2011) Until April 25, 2014). According to the company's statistics, 5,325 vehicles are involved in mainland China.
Vehicles within the scope of this recall may have misalignment of the engine trim of some vehicles under certain circumstances, which may cause the misaligned engine cover to come into contact with the exhaust manifold, which may cause a fire hazard and pose a safety hazard. GAC Fiat Chrysler Automobile Co., Ltd. will remove the improved engine trim bracket system for free inspection and replacement of vehicles to eliminate safety hazards. The inventory vehicle will be sold after eliminating the hidden danger.
From October 31, 2015, users can directly contact the nearest dealer or call the GAC Fiat Chrysler Automobile Co., Ltd. service hotline (400-878-9999) for consultation. You can also visit the Import and Export Commodity Inspection section of the AQSIQ website (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC). More information. In addition, you can also call the Quality Hotline of the Defective Product Management Center of the AQSIQ or the quality hotline of the local entry-exit inspection and quarantine institution: 12365 (switch No. 2), reflecting the problems in the implementation of the recall activities or submitting defects.
This kind of part is used in Plastic Injection Mould and as one of the components. Our company can finish the whole process from the making of Mould Parts and the complete mold to the producing of Plastic Injection Parts , including the Plastic Injection Molding design.
Injection molding is a process in which custom molded component manufacturers heat a polymer until it reaches a highly plastic state and forces it to flow under high pressure into a mold`s cavity to solidify. Manufacturers then remove the molded part, or molding, from the cavity. The process produces discrete components that are almost always net shape, reducing the need for surface finishing. A mold may contain more than one cavity, allowing Custom Injection Molding companies to produce multiple moldings each cycle. The production cycle time ranges between 10 and 30 seconds. Cycles of 60 seconds or longer are also common.
Plastic Injection Moulds,Plastic Injection Mould Design,Plastic Injection Molding,Plastic Injection Moulding Automotive
KUNSHAN YSL PRECISION MOULD CO.,LTD , https://www.yslprecisonmould.com