Top 10 Cooperation Business Opportunities in the Fast Track of the Global Mould Industry

1. The development of the US mold industry entered the fast lane in 2011

The American Mould Manufacturers Association recently conducted a survey of its members on the industry's operating profile. The survey showed that the industry has gradually developed to an optimistic level. Fifty-six percent of respondents indicated that their operating conditions were positive, which was a 3% increase. 15% of respondents stated that their operating conditions were quite good in the past three months, and 20% of respondents said that their business conditions are generally good. In addition, the association also conducted a survey of the 2011 industry outlook forecast, and remained optimistic overall in the first quarter of 2011; among them, the number of members expected to have a substantial increase in business accounted for 6%, which is in line with the statistics of autumn 2010; The members whose quarterly business maintained steady growth increased from 35% in the autumn survey to 42%; the proportion of the members who predicted that the business growth volume remained unchanged dropped from 44% to 40%. The proportion of the members who predicted that the business growth volume will decrease in the first quarter will be reduced from 15% to 11%; only 1% of respondents expect the business to decline significantly. Overall, respondents all stated that their operating conditions in 2011 have been greatly improved and are more optimistic than in the past decade.

2. Sino-German mold technology cooperation assists the development of the Ningbo mold industry

The Ningbo mold industry, which is being "graded" from mid- to mid-range to mid-to-high grade, will receive the help of the mold developed country Germany. According to Luo Baihui, head of the International Die & Metals and Plastics Industry Suppliers Association, Germany is one of the world’s most powerful mold makers and one of the world’s most important mold suppliers. Deng Yubo, secretary-general of the German International Entrepreneurs Chamber of Commerce, learned that Ningbo has developed manufacturing industries, many private enterprises and flexible mechanisms. Ningbo is close to the surrounding economically developed cities such as Shanghai, Hangzhou and Suzhou, and has a vast market and cooperation opportunities. At the same time, Ningbo's mold industry ranks in the forefront of the country, and the desire for seeking technical cooperation is also very strong. All these have provided a basis for cooperation for German companies to implement industrial transfer. Similar to Ningbo, the manufacturing industry in Germany is also very developed and it is now necessary to transfer industries.

The German International Entrepreneurs Chamber of Commerce together with the German government visited Ningbo and launched the “China-EU Strategic Partnership Action Plan” expressing their willingness to cooperate with Chinese companies. The Secretary-General of the German International Entrepreneurs Chamber of Commerce stated that the annual production value of German mold workers is 300,000 Euros, while China is only 10,000 Euros. The gap is relatively large. Through technical training and the introduction of advanced equipment, it hopes to help Ningbo mold enterprises increase their technological level. And efficiency. At the same time, through the introduction of German companies to participate in the exhibitions in Ningbo and China, the German mold enterprises will further understand the technical conditions and market demands of Chinese companies and promote the in-depth cooperation between Ningbo and the German mold industry.

The German International Entrepreneurs Chamber of Commerce and the Ningbo Mould Enterprise Association signed a strategic cooperation agreement. The three major ways of technical training, technology introduction and exhibition cooperation will be used to achieve cooperation between China and Germany mold industry. If the cooperation goes smoothly, it will promote the upgrading of molds and related industries in Ningbo and technological progress. According to the agreement between the two parties, Ningbo and the German mold industry will first cooperate in technical exchanges and personnel training, the introduction of advanced mold manufacturing equipment and software, and exhibition cooperation. The German International Entrepreneurs Association will establish a special liaison office in Ningbo to assist the agreement. Implement and carry out.

3, China-Australia mold market prospects for cooperation

In recent years, Australia’s economy has developed rapidly and it is expected to maintain its growth momentum in the future. According to Luo Baihui, executive director of the International Modular Association, the Australian Mould Association, Adelaide Mould Association, and Melbourne Mould Association all place great hopes on the Chinese mold market and manufacturing companies, which will create favorable conditions for China to export molds to Australia.

At present, the mold manufacturing industry in Australia, especially the stamping mold manufacturing capacity can not keep up with the needs of economic development, for which urgent need to import stamping mold manufacturing technology and capabilities from abroad, and China's mold industry in this area happens to have a larger advantage, the market prospect is good. The specific analysis is as follows: China's stamping mold companies have higher levels of technology and equipment than Australia. At present, there are 56 CNC milling machines in China's top four automotive die-casting enterprises, of which 35 are large ones and 5 are high-speed ones (where the number of spindle rotations is 20,000 rpm/minute). It has 143 computer workstations, 200 sets of various software, and 8 sets of analysis software and reverse engineering software. There are 5 large-scale coordinate measuring machines, 30 debugging presses (1600 tons, 1400 tons, 1300 tons, 800 tons, 600 tons), 16 research and distribution presses, and cranes with 30 tons and 15 tons, which far exceed Australia. Equipment level.

China has complete die design and manufacturing technicians and programmers, skilled CNC machine operators, fitters and mold debuggers. China's labor wage level is lower than that of Australia. Currently, it has the ability to manufacture stamping dies for cars. The company's production capacity is more than 200 sets to 400 sets of large and medium-sized stamping dies. Moreover, the equipment load of enterprises is not high enough to fully manufacture molds for Australia.

The software used in Australian automotive mold design and manufacturing is mostly ug, pro-e, catia, and euclid. The software used by Chinese mold companies is basically the same, and can be shared. Both the cae analysis software and the simulation molding analysis software have similarities. This provided us with good conditions for the development of Sino-foreign cooperation.

4. Japanese-funded automobile molds settled in Tangshan Modern Equipment Manufacturing Industry Zone

Recently, Japan's Toyohwa Co., Ltd. and Kondo Work Co., Ltd. established a joint venture in Kaiping District to build an annual output of 110 sets of mold projects approved by the Tangshan Development and Reform Commission and successfully settled in the Tangshan Modern Equipment Manufacturing Industrial Zone. The project has a total investment of 8 million RMB and a registered capital of 5.6 million RMB. It has a 400 square meter workshop and purchases 23 sets of main equipment such as CNC machining centers and CNC milling machines. It has designed and manufactured 100 sets of forging dies and 10 sets of other dies. . After the project is completed and put into production, the annual sales income will be 5.8 million yuan, and the profit and tax will be 1.837 million yuan.

This is the sixth Japanese-funded project that has successfully settled in this area since the Sumitomo Heavy Machinery Speed ​​Reducer, Sumitomo Construction Machinery Excavator, Fengshi Forging, Japanese Leather Collagen, and Hypertherm Resin Engineering Control Box. The first automotive mold manufacturing project. The implementation of the project mainly provides high-quality forging dies for the accessories industry, and at the same time fills the gaps in the automotive mold industry in the region, laying a solid foundation for promoting the automobile parts manufacturing industry in the region.

5. 30% mold of Dalian Mould Industrial Park enters Japan and Europe market

On January 6, Ise Precision Metal Dalian Co., Ltd. officially put into production at the Dalian Mould Industrial Park. This is also the sole sole proprietorship of the three companies invested by Ise Steel Corporation in Dalian. According to reports, Ise Precision Metal Dalian Co., Ltd. is located in No. 41 Development Zone, with a total investment of US$5 million. The new factory has introduced a full range of advanced production lines from planned R&D to quality management, and from casting to machining. The main precision casting products are mainly used in the electrical appliance industry, automotive industry, and industrial and civilian valves. It is estimated that the annual sales will reach 10 million US dollars in the initial period, and will reach 20 million US dollars after the production is completed.

Under the guidance of the country's industrial policy for the development of the mold industry, the Dalian Development Zone has actively promoted the development of the mold industry cluster and continuously improved the technological innovation capabilities and supporting capabilities of the small and medium-sized enterprises. The industrial agglomeration effect has been increasing. According to Luo Baihui, head of the International Modeling Association, there are currently more than 100 mold companies in Dalian Mould Industrial Park. These companies are not only supporting the home appliances, automobiles, and electronics industries in Dalian and Northeast China, but also have 30% of their molds entering the Japanese and European markets.

6, Huangyan mold industry chain extension to create a gold signboard

Huangyan's mold industry sprouted in the mid-1950s. In 1986, when Yang Lan, Vice Minister of the Ministry of Machinery Industry visited the Yellow City, Huang Yan was honored as "the hometown of moulds." At the beginning of 2006, the Secretary-General of the China Association for Modeling, Cao Yanan, pointed out at the “Huangyan Mould Industry Forum” that the mold is supplied to the product industry, which can increase the efficiency of the related industry by about 100 times than itself. The development of the Huangyan mold is not only It has led to the development of its own plastics industry, and it has provided molds to various places throughout the country. It actually supports the development of related industries in the country. On March 18, 2006, the Huangyan District Government signed a cooperation agreement with the National Development and Reform Commission and the Institute of Industrial Economics of the Chinese Academy of Social Sciences. Huangyan's mold industry was upgraded to a demonstration base and the mold industry began to move toward the high end.

With the formation of “one of the four major motorcycle segments in the country” and “the largest production base for motorcycles and accessories in the country”, Taizhou’s mold industry has reached a peak. With the extension of the mold industry chain, various upstream and downstream industries and related auxiliary industries have been brought together to further deepen the professional division of labor, increase production efficiency, and increase industrial added value. After years of development, the Huangyan Mould has developed into a pillar industry with solid foundation and obvious advantages, and it has formed a variety of products, complete industrial support, large technical team, and high degree of industrial chain extension. Among them, the plastic mold accounts for about 85% of the total volume. It involves a wide range of products, short production cycles, low costs, and high quality and quality of molds. It has high influence both domestically and internationally.

According to the five-year plan for the development of the mold industry in Huangyan District, by the year 2015, the total output value of the mold industry will reach 20 billion yuan; more than 10 enterprises with over one billion yuan in output value; and “Huangyan Mould” will become the first brand in the domestic large-scale plastic mold field. . Huangyan Mould made efforts to create gold signs, standing on the top of the pyramid, and became the "magnifying glass" of Taizhou's manufacturing industry.

7, Quanzhou force machine tool mold cluster equipment manufacturing to create one hundred billion industry

At present, Quanzhou's equipment manufacturing industry covers only two provincial-level key industrial bases in the province, and initially forms engineering sub-clusters such as construction machinery, building materials machinery, textile machinery, shoemaking machinery, machine tools, molds, plumbing, and bearings.

During the “Twelfth Five-Year Plan” period, Quanzhou strived to cultivate five hundred billion yuan industrial clusters, of which equipment manufacturing industry is one of the one hundred billion industrial clusters. Focus on the integration of large and small shipbuilding, automobiles, rail transportation, aerospace components, construction machinery, light textile machinery and other complete sets of equipment. As a heavy-item item in Quanzhou's equipment manufacturing industry, railcars completed an investment of 9780 million yuan last year, accounting for 129.7% of the annual planned investment; in 2011, they will strive to fully enter the main construction construction by May 1, and strive to basically complete the construction of the first-phase plant by the end of the year. Equipment installation and trial production.

8. Shitailong Electronic Mould Industrial Park undertakes the first wave of industrial transfer

Huai'an Shitailong Electronic Die Industrial Park is located at Nanmachang Avenue, Huai'an Economic Development Zone. It is 2 kilometers away from Foxconn and Dafang Electronics. It is adjacent to the auto parts production base, the state-level export processing zone, and the North Link Airport Industrial Park. It is close to the Beijing-Shanghai high-speed exit and the Xinchang-Chongqing double-track railway, and it takes 15 minutes to Huai'an International Airport. The Industrial Park plans to build an electronic mold R&D building, a mold production area, an electronic product production area, a mechanical processing area, and a living supporting area. It is a grand attraction for global brand enterprises and supporting companies in the industry chain.

Located between the “Yangtze River Delta Economic Circle” and the “Circular Bohai Bay Economic Circle”, Huai'an is an important central city in the hinterland of northern Jiangsu. With Huai'an as the center, it can radiate a population of 20 million within a radius of 100 kilometers, and can radiate a population of 30 million within a radius of 150 kilometers. . Highways, railways, and waterways extend in all directions and are suitable for large influx of raw materials and products. They can be quickly extended to the country, with extensive business opportunities and a huge market space. Huai'an Economic Development Zone is close to the east side of the main urban area of ​​Huai'an City, and the location advantage is very obvious. On the highway side, three highways including Beijing-Shanghai, Ninghuai-Huai, Xuhuai Salt, Ningsu Xu, and Ninglian passed through Huai'an, and three of them converged in the area. In terms of railways, Xinchang Railway runs through the entire territory and reaches major cities such as Beijing, Qingdao, Harbin, and Chengdu. In terms of waterways, a number of river basins such as the Beijing-Hangzhou Grand Canal have passed through the area, and the annual throughput of the ports along the canal has reached 13 million tons. The waterways have reached Shanghai Port, Nanjing Port, Zhenjiang Port, and Lianyungang Port. In terms of air transportation, Huai'an International Airport was officially opened on October 1, 2010. With the construction of the Huai'an Airport, the continuous expansion of the railway network and the expressway network, as well as the upgrading of the existing waterway, Huai'an’s “geographical advantages” will become more prominent. At present, the industry and capital in the Yangtze River Delta are gradually progressing from south to north, and have become the first wave region to undertake economic radiation and industrial transfer in the Shanghai-Nanjing-Hangzhou metropolitan area and the big economic circle.

Air Leg Rock Drill

Drilling Tools,Drill Equipments,Hammer Drilling Machine

Rock Drill,Jaw Crusher Co., Ltd. , http://www.cn-gsc.com